Free To A Good Home

[musketman]

Whoever wants a FREE Lyman single cavity .678 round ball mold can have it...
It takes large handles and sells new for $48.95, I'm keeping the handles because I cast .715 and .735 round balls...

It cast a 468 grain round ball, ~14.9 per pound of lead...

No more than 100 balls cast through it, sat in the closet for 10 years, some very light surface rust...

If you want it, let me know here or send me a private message with your address, first one that does it, gets it...

I will mail it free of charge...

"My .69 caliber is no longer going to be shot, it's 166 years old now..."

 

[musketman]

Birddog6:
You will get it...

I'll ship it out tuesday...

 

[JesseJames]

Musketman do have any tc maxie-ball 32 cal to sell? Do you know where I can get one?

 

[musketman]

quote:Originally posted by jessejames:
Musketman do have any tc maxie-ball 32 cal to sell? Do you know where I can get one? Sorry, fresh out of .32 caliber molds...

But I'll try to locate a set and private message you if I find anything...

 

[djnye]

you, sir, are a very nice person!!!!!

take care

 

[JesseJames]

Musketman
Thank you for keeping an eye out for that 32 cal mold. Really do appreciate.

 

[musketman]

quote:Originally posted by jessejames:
Musketman
Thank you for keeping an eye out for that 32 cal mold. Really do appreciate. You are welcome...

However, this may be harder than it looks, the T/C factory lost a lot of it's tooling in a fire (I e-mailed them)...

I got e-mails out to Lyman, Lee and all of the major bullet mold dealers...

If there's one out there, I'll find it for you...

I don't mind searching for anyone, I like a good goose chase...

 

[musketman]

quote:Originally posted by jessejames:
Musketman
Thank you for keeping an eye out for that 32 cal mold. Really do appreciate. Check it out, I think I found something you can use...

http://muzzleloader.biz/blackpowderbullets.htm

They do sell .32 maxi's, and they might have a mold for sell too.

 

[JesseJames]

musketman

thanks for the reply,I just emailed them,but still keep an eye out for one. thanks again.....

 

[blckhrn]

If memory serves there is a buckshot that is .31, yes, no?

 

How 'bout it fellers. A very fine man gave a good tool too another very fine man!
We front stuffer people tend to be a generous lot.
I can't tell ya how much free information I've gotten from the likes of you guys.
Some was actually useful. :haha:

 

[musketman]

If memory serves there is a buckshot that is .31, yes, no?

Lead Buckshot Sizes

No. 000 .36 Inches
No. 00 .33 Inches
No. 0 .32 Inches
No. 1 .30 Inches
No. 2 .27 Inches
No. 3 .25 Inches
No. 4 .24 Inches

 

[blckhrn]

.33 R.E.A.L.R.B.???

Hey Musketman, how many toothpicks in that box?

 

[musketman]

Hey Musketman, how many toothpicks in that box?

I must be slow today, what box? ::

 

[blckhrn]

Ever see the movie "Rainman"? Can you count into a 5 deck shoe? Wanna take a trip to Vegas?

 

[Deadeye]

I know your lead ball sizes are correct but I recently bought a 5 lb. bag of Lawrence brand #1 buckshot. when I opened it I could see they were big, when I miked them they were .381, even bigger than 000. Maybe just stamped wrong. ::

 

[blckhrn]

If yer shooting PRB, I just looked at TOW catalog (great deal for $10) and they have threemolds under .32---; ,308, .311 and .319. A 2 cav mold from them is $17 or so complete (Lee alum.) Single cav. $13.25

 

[Zonie]

At wer real nice o TOW ta have a .308 diameter round ball mold fer ma thartyotsix Sprangfield.
Wonder how fast a 50 grain load o 4198 wal push one o them little balls? ::