• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Gemmer Hawken Rifle

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

Ryanlpuckett

40 Cal
Joined
May 22, 2023
Messages
133
Reaction score
82
Selling my Investarms Gemmer Hawken in 50 cal. All steel furniture. never shot. Asking 450.00
 

Attachments

  • 20230729_083148.jpg
    20230729_083148.jpg
    2.3 MB
  • 20230729_083128.jpg
    20230729_083128.jpg
    2.2 MB
  • 20230729_083113.jpg
    20230729_083113.jpg
    2 MB
  • 20230729_083029.jpg
    20230729_083029.jpg
    2.3 MB
  • 20230729_083007.jpg
    20230729_083007.jpg
    2.2 MB
  • 20240127_063610.jpg
    20240127_063610.jpg
    11.5 MB
Crap, I forgot.... give me a little bit, the photos were taken a few months ago. I need to take another with a photo.
Don't forget the photo of the rifle with a card or piece of paper adjacent to the rifle with your screen name and the date of the photo. Thanks.

LD
 
I am somewhat interested in this as I have been contemplating one of these in .54

Is this a factory built gun or a kit gun?
Is the finish as glossy as it looks in the photos.
How does the touchhole sit in relationship to the pan?
What forms of payment do you accept?
 
I am somewhat interested in this as I have been contemplating one of these in .54

Is this a factory built gun or a kit gun?
Is the finish as glossy as it looks in the photos.
How does the touchhole sit in relationship to the pan?
What forms of payment do you accept?
This was a kit gun by Investarms. It has a 32" barrel, and it is as glossy as in the photos. Everything from what I can tell lines up as it should in reference to the touch hole. I will send a photo when I get home so as you may have a better look. As far as payment, do you have Facebook messenger? I may still have venmo, have to check. Otherwise, a money order would work, would have to clear before I could ship.
 
This was a kit gun by Investarms. It has a 32" barrel, and it is as glossy as in the photos. Everything from what I can tell lines up as it should in reference to the touch hole. I will send a photo when I get home so as you may have a better look. As far as payment, do you have Facebook messenger? I may still have venmo, have to check. Otherwise, a money order would work, would have to clear before I could ship.
Here is that photo for you!
 

Attachments

  • 20240127_152955.jpg
    20240127_152955.jpg
    1.5 MB
Good morning,

Yes, however, I lost my job. Seeing as how I have little ones, priorities dictate action. It a beautiful rifle, and love having it around, but life happens.

Best

Ryan
sorry to hear about the job loss. I am certain you will find a buyer. I have two GPR's, one flint, one percussion. they are fine rifles.good luck.
 
Status
Not open for further replies.
Back
Top