Help with identification and value

[Al Fernandez]

Hello, All
Looking to purchase this Italian Colt replica. Looks rough on the outside (To me) but owner says unfired and everything tight. Just been banging around since his father purchased it.
Only seen photos will be able to look at it in person before purchase. Any idea value and manufacture? I plan on buying to shoot. Don't know anything about percussion revolvers (Yet)

 

[hawkeye2]

The barrel has been shortened and there is no latch to hold the loading lever up, pass on it.

 

[Youngblood]

Depends how much they want.
I would not pay more than $100-$150

 

[sheriff john]

Someone's "project" gun. Non-original front sight, attempt at customizing the grip and what looks like a brass frame. First time you shoot it, the loading lever will probably fall down, rammer may go into a chamber, and the Indians will have your hair hanging from a lodge pole.

To me, it might turn into an interesting but hard to resell thing that I would never get around to finishing. Thus, I also would pass, even if it were REALLY cheap ($50).

 

[Al Fernandez]

I was guessing the barrel had been cut after some google-foo, but didn't catch the missing latch. Thanks.

 

[Youngblood]

They might have some custom holder upper for the rammer in there. A Walker style or something you dont see in pic.

 

[SDSmlf]

Looking to purchase this Italian Colt replica

Curious as to which particular Colt model you believe this gun to be a replica of?

 

[Smokerr]

Agreed with the $50.

If you want something to just play with as an experiential aspect (say playing with shims and arbor stuff), it might be worth a few bucks but........

If you want a gun that has shooting value, then not at all. Have to wonder what other stuff was done to it.

Finish was removed or it was in a sack on the side of a horse and rubbed off.

 

[Al Fernandez]

Curious as to which particular Colt model you believe this gun to be a replica of?

Me too. Advertised as a model 3 Dragoon but as I said I know nothing about percussion revolvers.

 

[Jappo]

Not a replica of anything. Has an 1851 Colt barrel and 1860 cylinder. Grips look like 1851 also. The frame is 1860 civilian style, but they were never made in brass. Depends on brand, the barrel can be replaced. Barrels are about $65 up. Some with loading levers and others without. If it functions as it should, $125 and up.
It should have three clicks. Half ****, cylinder lock and full ****. Fully **** it slow and lower hammer manually. Notice rotation of cylinder. Then **** it a little faster. It won't hurt it to dry fire it once. Just don't make a habit of it. It will peen the nipples/cap cones.
Hope this helps.

 

[ernbar]

IMO pass on it. Too many nice pistols advertised here at more than fair prices.

 

[Jappo]

Without any other stamp available, can't tell who made it. It is a 1971 model.

 

[Whitworth]

That's a $50 gun. Run away and buy something else.

 

[Jappo]

I would guess to each his own. Depending on price, I wouldn't mind having it.
This one was found in an attic. EIG junk. Its now a Griswold and Gunnison.
Hope you don't mind me adding to your post. Just sharing.

 

[Pete G]

Definitely NOT unfired. Blue is worn off the rammer from loading.

 

[DOUBLEDEUCE 1]

I definitely would pass on this revolver. There is just an oddness to it overall. As mentioned, the sight, rammer, brass frame and the finish looks not quite right. My revolvers from 1959 and 1960’s have been fired a lot, but they don’t look like that one. Pass.