There's almost no end to the list of things you can mess up with a Dremel.
Help with lock
- Thread starter Bbtech73
- Start date
Help Support Muzzleloading Forum:
OK, I'm convinced - no Dremel. I have a nice set of wood working chisels. I removed the lock and it appears to be the original lock Lyman installed in their rifles. Now I'm trying to decide it I should replace the lock while I am going to the work of fitting it properly.
My thinking also. I don't know how old this Lyman is but current models use coil springs, whereas L&Rs have leaf springs and some wood will need to be removed for a proper fit.
The lock is labeled on the interior as RPL and it has leaf springs. The rifle is probably from about 2012. I acquired it in 2014 just before I moved to my current location and it has been in the original box. I have another bp flintlock that I use and kind of forgot about this one until I was cleaning out the closet last week. I will definitely take the time to fit the lock properly.
RLP is an L&R replacement the same thing is stamped on the back of the one in my photo. The L&R is a much better lock than what comes with a Lyman the one in the photo will be going in the rifle pictured.
Ragged Edge
36 Cl.
Look to make sure your leaf spring is not part of the problem. Much wider than the coil spring of the original.
Thanks all. I got this rifle from the ex-wife of a poor guy in a nasty divorce for some work I did for her. I offered it back to him but he said keep it and bad mouthed his wife. I felt kind of bad but didn't want to get too involved.
Last edited by a moderator:
gustrolland
36 Cl.
- Joined
- Feb 3, 2020
- Messages
- 96
- Reaction score
- 77
45 years of gunsmithing, and I use both. Either can be a wood or metal destroyer if used wrong.
You can use a small round file to relieve where the cock is hitting the stock. Much easier to use than a chisel.
erhunter
45 Cal.
Andy52, did you try to get the hammer off by prying under it from the face of the plate? There are numerous screwdriver marks on there the way it looks? Take the lock apart with the proper tools, it will prevent damage to the lock.
No sir I didn't it was that way when I bought it. It came from a private sale and the price was right so I bought it. The whole lock will have to be cleaned up and polished and I'm pretty sure those marks will come out when I get around to that.
hanshi
Cannon
Yes there is an end to things one can mess up with a Dremel, it simply has not yet been reached.
