• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Honey pot made from a house built in 1819

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 8, 2019
Messages
422
Reaction score
446
Location
Covington, VA
I cut up another white oak log from the falling down house I am salvaging from. This one is older than the last one. The outer edge was difficult to count the rings since it is the soft wood and badly deteriorated but there is over 130 years of growth in this honey pot. That means the center of this tree is bare minimum 1690s and given the more than inch of old growth I cut to get to good wood this is much more likely prior to the 1650s. In other words when Europeans first came into this area in the 1750s this tree was already 100 years old. The logs are the first floor subfloor. The top I made from a rather poor condition locust piece from the same house. In the window frames the top and side pieces are made of walnut and the window sill is made of locust since it is a harder wood. They didn't survive well these last two years but it sure is pretty good with good history. $100 for the decorative honey pot and lid plus shipping. Christmas is right around the corner :) When I ship it I will include a write-up of the history of the house with photos including where each wood came from.
 

Attachments

  • PXL_20231107_144356527.jpg
    PXL_20231107_144356527.jpg
    3 MB · Views: 12
  • PXL_20231107_144401532.jpg
    PXL_20231107_144401532.jpg
    3.2 MB · Views: 0
  • PXL_20231107_144409433.jpg
    PXL_20231107_144409433.jpg
    2.5 MB · Views: 0
  • PXL_20231107_144414078.jpg
    PXL_20231107_144414078.jpg
    4.2 MB · Views: 0
  • PXL_20231107_144420316.jpg
    PXL_20231107_144420316.jpg
    3.1 MB · Views: 0
  • PXL_20231107_144426512.jpg
    PXL_20231107_144426512.jpg
    3.4 MB · Views: 0
  • PXL_20231107_144432554.jpg
    PXL_20231107_144432554.jpg
    4.6 MB · Views: 0
  • PXL_20231107_144436391.jpg
    PXL_20231107_144436391.jpg
    4.6 MB · Views: 0
  • PXL_20231107_144443135.jpg
    PXL_20231107_144443135.jpg
    4.9 MB · Views: 0
Last edited:
Status
Not open for further replies.
Back
Top