Inherited a flintlock pistol and know very little about flintlocks. Anyone able to tell me what I have, how old it is? I’m not interested in selling it.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Inherited a flintlock pistol
- Thread starter wtomlinson222
- Start date
Help Support Muzzleloading Forum:
Larry Akers
40 Cal.
- Joined
- Jun 6, 2016
- Messages
- 422
- Reaction score
- 205
Your pistol is a flintlock screw barrel pocket pistol. In use the barrel is unscrewed from the frame by means of a special wrench (usually lost). The wrench is a handled ring with a notch to fit over the raised boss near the breach of the barrel--shown in your second photo. A powder charge is placed into the exposed chamber in the frame, a ball placed on top and the barrel screwed back on. The pistol is placed on half-cock, primed and the frizzen closed and the trigger folded forward flush with the frame. As the pistol is brought to full-cock the trigger will flip down ready to fire the gun. The London proof mark you show (there should be more marks) dates the pistol to about 1813 or after.
Last edited:
- Joined
- Nov 26, 2005
- Messages
- 5,214
- Reaction score
- 10,845
Hi,
William and Samuel Dawes worked in Birmingham, England 1799-1812. They often marked their guns "London", which was a common marketing ploy at the time. You have a nice little "box lock" turn off pistol. Many were made and they were quite popular for personal defense.
dave
William and Samuel Dawes worked in Birmingham, England 1799-1812. They often marked their guns "London", which was a common marketing ploy at the time. You have a nice little "box lock" turn off pistol. Many were made and they were quite popular for personal defense.
dave
user 48679
54 Cal.
- Joined
- Sep 15, 2020
- Messages
- 1,661
- Reaction score
- 2,157
Given that most I've seen were caplocks, I find that it's a rock lock very interesting - BTW, please accept our condolences on your loss.
user 33882
36 Cl.
- Joined
- Aug 21, 2019
- Messages
- 94
- Reaction score
- 170
Those are not standard London Gunmakers Company proofs and are likely period forgeries. The standard London proofs should include a "crown/GP" proof mark of slightly different style and then a "crown/V" view mark. The Birmingham makers didn't have their own formal proofhouse until 1813 and previously would sometimes mark their firearms with their own "private" proof marks or illegally copy the London proofs.
Thank you. I’ve been trying to figure out why my grandfather held onto this. Birmingham, England makes a lot of sense since my Great-grandfather emigrated here from Birmingham. Perhaps my grandfather was holding on to it because it was his dad’s gun. I will be digging through my grandfathers tools and such on my next trip home to see if I can find the barrel wrench. Any suggestions on how to determine the caliber?
SlidePicker
40 Cal
Caliper inside the muzzle
user 48679
54 Cal.
- Joined
- Sep 15, 2020
- Messages
- 1,661
- Reaction score
- 2,157
Alternatively, remove the barrel and drive a lubricated lead fishing sinker through the bore and measure it with a micrometer or calipers after it comes out.
Thank you
Welcome to the forum Bill! That is a fine pistol you have there! Keep us posted!
Will do
