I would love to find a 1*66 or 1*60 RB Twist barrel that would fit my Cabela's Ivestarms BP . Don't even care what Caliber. Ive got everything I need for .50 cal. Just never had a dedicated PRB barrel. Love to work with one.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Investarms Aftermarket Barrels?
- Thread starter Luke M
- Start date
Help Support Muzzleloading Forum:
What is the twist of the one you have now?
bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,348
The Green Mountain drop-in barrels for TC Hawken will drop right in your stock. May take a few file strokes on the barrel hook or tang and maybe tighten or loosen the wedge and maybe trim the undeerrib just a hair. In other words, the same things you have to do sometimes to get them just right on a TC gun. They’re discontinued but can still be found on gunbroker & etc. And I believe Rice Barrels is still making their drop-ins. Not sure but,for Rice you may have to supply the breechplug.
And of course, there’s always the option of sending your barrel to Robert Hoyt in Pennsylvania for a rebore/reline to your preferred caliber/twist.
And of course, there’s always the option of sending your barrel to Robert Hoyt in Pennsylvania for a rebore/reline to your preferred caliber/twist.
The twist on the Investarms is 1-48. Which does fine up close. My boy was able to split balls at 25 yards on an axe head and hit 2 clay pigeons! He is a rifleman at 19 and was at 10 with air rifles (there was a bench involved). Hate to sound jealous but I think Id need a .54 or .58 to increase my chance to beat him! But I'm getting old and don't see really well after Covid. I have a couple good trades If I wouldn't get scrubbed for offering those new-fangled BlackHawks! Stupid self-contained cartridges. Just want a ROUND BALL GUN
Bobby Hoyt would be a less expensive option than a GM drop-in (if you can find one).
Track has a .45 drop in barrel : Muzzle loading rifle barrels, IBS by Green Mountain for T/C Hawken - Track of the Wolf.
Howdy folks. Will the lock from a T/C Hawken also fit the Investarms Hawken stock? Oddly enough, I am in the same boat as Luke. Have the rifle but would prefer another barrel. Someone gave the gun to me after it had been sitting in a barn for a few years and the barrel is junk and the hammer won't stay cocked. Thanks for asking the question Luke. That was also on my mind as well.
Maybe. It may fit, or you may need to do a little work to get it to fit.
Maybe Bobby Hoyt could "fresh out" your bbl. to .54cal. and make it 1:60 or 1:66? I think it would be more economical than looking for a replacement bbl.
Does he have a web site? Can't seem to find it. I may send him a Fast twist 1-20 .45 XTR Black Diamond barrel and have him rebore it to a 1*66 .50 cal. Yeah, Yeah, I know we don't mention the dirty inline word here, but I hate this barrel it only shoots Sabots well and I can't use it for hunting in the state of Colorado. Ive tried selling it but nobody wants it can't give it away
Track said their GM barrels will fit
Check the TOW listing.
bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,348
Mr. Hoyt doesn't have a website. You either have to phone or write to him. Some just send their barrels with a note of what they want done. He sends invoice with your barrel when he sends it home to you.
What's the going rate for this kind of work?
Depends on what you have and what you want done. He bores barrels out bigger. He sleeves barrels to be smaller. He can make smoothbores or probably any twist you could want - slow or fast. His contact info is:
Bobby Hoyt
Freischutz Shop
2379 Mt Hope Rd
Fairfield, PA 17320
ph# 717-642-6696
Call him at the start of the day, and let it ring for a while. Good luck!
Bobby Hoyt
Freischutz Shop
2379 Mt Hope Rd
Fairfield, PA 17320
ph# 717-642-6696
Call him at the start of the day, and let it ring for a while. Good luck!
bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,348
One other thought is, you could take a Great Plains Rifle roundball twist barrel and remove the two barrel lugs and add one where it needs to be for your wedge slots and be good to go. Or you could inlet the existing lugs into the barrel channel where they'd be harmlessly out of the way in case ya might want a Great Plains Rifle in the future.
Similar threads
