• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Large Horn (Reduced Again)

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 5, 2021
Messages
1,304
Reaction score
1,655
Location
SE PA
Very large and fairly straight powder horn. It has threaded brass fittings at both ends, a braided leather carry strap and stores up to one pound of powder. Just over 15 inches length and 2.5 to 3 inches diameter at the base.

I recently re-polished, to buff out some light scratches, and sealed it with 3 coats of permalyn. There is a small repair near the base, completely tight, but a 3/4-inch crack is visible (photo of the area below).

Offered at $40 $30 plus $10 shipped in the US. Please PM for details.
 

Attachments

  • large_base.JPG
    large_base.JPG
    78.2 KB
  • PXL_20220608_002437298.MP.jpg
    PXL_20220608_002437298.MP.jpg
    118.7 KB
  • PXL_20220608_002504923.MP.jpg
    PXL_20220608_002504923.MP.jpg
    57.3 KB
  • PXL_20220625_201537683.jpg
    PXL_20220625_201537683.jpg
    175.6 KB
  • PXL_20220625_201551334.jpg
    PXL_20220625_201551334.jpg
    214.3 KB
  • PXL_20220625_201559226.jpg
    PXL_20220625_201559226.jpg
    204.5 KB
  • PXL_20220625_201641806.jpg
    PXL_20220625_201641806.jpg
    125 KB
  • PXL_20220608_002648409.jpg
    PXL_20220608_002648409.jpg
    151 KB
Last edited:
Status
Not open for further replies.
Back
Top