• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Leather patching for round balls video

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

duelist1954

40 Cal.
Joined
Jun 27, 2011
Messages
430
Reaction score
72
I had always wondered about whether American frontiersmen used leather to patch their round balls in muzzleloading rifles. And I wondered what it would be like to shoot them.

So I did some testing and found out.

I have an article on the subject coming out soon in "Muzzleloader" magazine, so I thought I'd put together a video to go with it.
https://www.full30.com/video/55813d580689ef677d798b1ed1c3c0ab
 
Last edited by a moderator:
Interesting test.

Did I possibly miss it, or did you not explain how the deer skin was tanned? The reason I ask is because our departed forum member LaBonte, aka Chuck Burrows, reported using brain tanned buckskin and found he did not have to thin the leather to shoot the same size ball he normally shot.

Gus
 
No, I didn't say how it was tanned. It was not brain tanned, but I did mention that brain tanned deer skin is usually already scrapped thinner.
 
Mike,

I am certainly no expert on brain tanning deer hide, though I did brain tan one hide many years ago. One does scrape the flesh and fat off the hide as well as the hair, but as far as I know, there was no special scraping to reduce the thickness of the skin.

The difference with real brain tanned leather is it is more like thick cloth when tanned. Thus it will "squish down" or stretches easier under pressure better than modern commercial tanned hides.

You made a good point to look for the thinner belly leather of the commercial tanned hide you used.

I asked LaBonte if he used the Belly leather of brain tanned buckskin for the same reason. He said he found he did not have to just work with the Belly Leather and used all the hide for patching material with the same size ball he normally shot.

Brain tanning was the most common method of tanning along the frontier, whether done by Indians or by Frontiersmen, even as the frontier moved westward over the decades. So it was most probable the early Riflemen were using brain tanned buckskin for their patching material when they used deer leather. Of course they may also have used hides from other critters and brain tanned as well.

Gus
 
Mike, I though you might like some references to leather patches I've collected, against future need. :grin:

Espingarda Perfeyta, The Perfect Gun, Cesar Fiosconi & Jordam Guserio, 1718, Portugal
"Others made barrels with rifling inside, some with more, and others with less rifling, all of them deep and twisted in the form of a spiral. These were loaded by putting the bullet in a little piece of leather of a thin glove, folded only once, dipped in oil, and thus it was pushed down to the bottom in such a manner that the bullet may not lose its roundness."

An Essay on Shooting, 1789, by Cleator, Wm.
"In Germany they sometimes charge them in the following manner: a piece of thin leather or fustian is cut of a circular shape, and so large as to cover a little more than one half of the ball; this piece is then greased on one side, and being placed over the muzzle, the ball is laid upon it, and both thrust down together; by this means the leather or fustian enters into the rifles, and the bullet being firmly embraced by it, acquires the proper rotary motion in its passage through the barrel."

Scloppetaria:, by Capt. Henry Beaufroy, 1808
"Between powder and the ball, it is usual to put either a patch or a stopple. The former is that adopted for military service, on account of its greater facility in loading; yet, for purposes of amusement, it frequently occurs that the latter only, or sometimes both, are used. By the patch is understood the small piece of greased leather, &c. which is put round the ball before driving it down, to fill up the interstices of the grooves, which would, without this precaution, occasion too great a windage."

Practical Instructions for Military Officers, for the District of Massachusetts”, Epaphras Hoyt, published 1811
"A patch of thin linen cloth or soft milled leather, saturated with grease, must be slightly stitched round the balls, with small thread which will separate when discharged from the piece. Care must be taken that the patch and ball are of a suitable size to fill the caliber and channels of the barrel : if too large it will be difficult to force them down ; if too small the direction of the shot will be much less certain : When duly prepared the ball must be placed in the cartridge with the proper quantity of powder for the charge and priming, and the end of it so folded that the powder may be secure. In loading, the powder must be carefully emptied into the barrel. the ball separated from the paper, by the teeth, and driven down close upon the powder, but not so as to bruise the grains."

A handbook for riflemen;, by Wm. Duane, 1812
"The rifleman must be made acquainted with the nature of sights, and the aim of the rifle; how to load with loose ball, to force it dexterously into the barrel, so that it shall lie close upon the powder without bruising the grains; he must be taught how to use the plaister, which is a piece of greased flannel, fustian, or soft leather, to facilitate the passage of the ball into the barrel, and clean it."

A British Rifle Man : The Journals and Correspondence of Major George Simmons, Rifle Brigade, During the Peninsular War and the Campaign of Waterloo, Edited, with Introduction, by Lieut-Colonel Willoughby Verner, late Rifle Brigade. 1899
"The following is a description of the Baker rifle : Weight 9 1/2 lbs., barrel seven-grooved and 30 inches in length, rifling one quarter turn in barrel [1:120], bullet spherical, 20 to the pound, charge of powder 84 grains, flint-lock. The ball was placed in the center of a greased leather patch and rammed home, considerable force being necessary to effect this. At first, wooden mallets were issued to the Riflemen to facilitate the process of ramming home, but these were very shortly discontinued (circa 1803). A supply of greased patches was carried in a small box with spring brass lid in the side of the butt of the rifle."

"Remarks on Rifle Guns" eleventh edition by Ezekiel Baker, gun maker to his Majesty, 1835
"After you have loaded the piece with powder then put the greased patch of leather, calico or soft rag provided for that purpose on the end of the barrel,"
There are also copies of a target that was shot at 300 yds using "..balls that weigh 14 1/2 to the pound, four drams of powder, the balls were placed in a greased leather patch". The target was shot In 1800.

Spence
 

Latest posts

Back
Top