Reply to thread

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I’ve actually came across your method in my research searching every variation of my problem into google. I think by far you had a much cleaner result.


My hope is the same ends are met, I attempted various solutions to smoothing the crown with no luck. So I went atomic. If I ruined the last 1/2 inch of barrel I may have the rifle cut down.


I had little to lose as the rifle simply was not working in its current state and all the scotch brite and polishing wasn’t helping.


Maybe this can be a cautionary tale if my attempt was a failure at correcting this problem.


Back
Top