• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Let's Talk About Real Pine Tree Turpentine and BLO.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

64Springer

75 Cal.
Joined
Oct 26, 2022
Messages
5,690
Reaction score
14,186
Location
The Meat Counter.
Let's discuss real pine tree based turpentine and using it to thin BLO. 1:1 mix ratio.

I'm reading that real turpentine is hard to come by. I'm reading that most of what's out there is fake turpentine.

If you guys know of a brand of real turpentine that smells like Christmas morning, let me know.

Thanks.
 
Let's discuss real pine tree based turpentine and using it to thin BLO. 1:1 mix ratio.

I'm reading that real turpentine is hard to come by. I'm reading that most of what's out there is fake turpentine.

If you guys know of a brand of real turpentine that smells like Christmas morning, let me know.

Thanks.
Look under art supplies at a hobby store.
 
unless a short dry time and no development of a nice red patina to your wood as it ages is your goal, you might want to consider using raw linseed oil as opposed to BLO.. But then you would also need to verify that the Raw Linseed oil is not 'refined' - meaning that the fatty acids have been removed.
 
I love using turpentine in a mix. But your right, if you buy some at a big box store it's most likely fake. I'm just about out of the real stuff, need to search out a source. It does very well with BLO.
 
The boiled linseed in the wally worlds and hardware stores are not adequate either.
 
I make a Finn Mix using 2 parts pine tar, 1 part turpentine, and 1 part BLO, and I have used both "real" and hardware store stuff and I have never noticed a difference. Your mileage may vary though.
 
I agree that Tried & True is superior, I'm using it now. But regular BLO doctored up with some mineral oil or turpentine does ok in a pinch.
A good artist's stand oil from pressed linseed and truly boiled instead of just using chemical dryers is a good choice for good linseed. Hardware stuff is not really boiled oil like the old days.
 
I use turpentine to cut my boiled linseed in half 50/50 for the initial soaking coat, leave it sit sopping for a while, keep feeding the end grain areas and areas that a soaking it up, wipe off fully and put in sun or other uv to dry and then I start applying a little at a time, rubbing til my hand gets hot and then curing each application with sun.
 
Smells good.
I'm not from an area in the US where pine was a smell of my youth. I suppose that in some areas where coniferous trees are more abundant
I might feel the same way. Pine sent to me is not all that pleasant, but I do remember the smell of Turpentine, heck it was either that, mineral spirts or gasoline.
 
I'm reading that real turpentine is hard to come by. I'm reading that most of what's out there is fake turpentine.
If you need real turpentine for some magical mix to create the best finish,,,?
Then, It's not hard too find, simply read the ingredient list of the item on the shelf. And purchase pure turpentine.
It's actually that easy.

If you need to know about how a magic mix of turpentine and boiled linseed oil work as a finish,, or how un-boiled linseed oil and turpentine works together as a magic mix,, then that's a different topic,
,get it?
 
Back
Top