Molds . . . getting moldy around here.

[Ames]

Tell me you have guns for every one of those molds.

 

[FishDFly]

You would not believe the quality of Barry's workmanship.

 

[FishDFly]

Ames, I checked today and no .520 mold.
thompson50 I will check tomorrow but I don't think I have a spare .570
FishDFly, Yes, I am planning on being at the AL-KY longrifle show in January. I did not get to make it last year and I sure missed it. I will look for you there.

Only thing that will stop me is snow between Texas and there.

 

[FishDFly]

My wife would shoot me.

rob

That would be sad, to shot with a ball from one of your own molds that you cast.

 

[Billy Boy]

OK, so I decided to get most of my molds in one place and make a list. I ended up with a few duplicates mostly 1and two cavity dupes. The one size range I have the most in was 40 caliber.

I have mold envy…

 

[bearingsmith]

Have you a 41 cal mold in the 350 400 gr weight that could be used for a Rolling Block chambered in 40x70 bottleneck Sharps

 

[Rifleman1776]

Molds are like coat hanger. They multiply if you leave them alone in the dark. I lost a couple dozen in a move years ago. Now, have too many again, maybe ten I should sell.

 

[FishDFly]

If you do not use them, you do not have to feed them.

 

[mooman76]

I have 3 milk crates full and overflowing with moulds. Generally when I get one, I keep it, even if not needed any more. Most are for unmentionables but whenever I see a mould at a bargain price I get it because you just never know.

 

[nhmoose]

Now you need to collect some 4 cavities and above, why quit collecting! (enabler)

 

[Jake2454]

My wife would shoot me.

rob

do you have a .480 mold?

 

[FishDFly]

If she shoots him, he is not going to need it.

 

[Tradbow]

RB molds and 1/16 crappie jig molds are something a fellow cannot have enough of.

 

[Barry Strickland]

I checked and I don't have any spare molds of the sizes requested in my horde. Notice I said "spare" but I am getting to the age where I should start thinning down the heard.

 

[unclelouie]

I have 3 milk crates full and overflowing with moulds. Generally when I get one, I keep it, even if not needed any more. Most are for unmentionables but whenever I see a mould at a bargain price I get it because you just never know.

 

[unclelouie]

i need a mold for a .470 . possibly a .460-465. you got one you'll part with ?

 

[Cattywompuss]

Good morning, you going to the Alabama-Kentucky Rifle show in Rogersville, AL in January? My plans are to go to see if I can find a rifle or increase my pistol family.

Picked up an old .495 mold, Lou said it from the 1940's or so.

I'm going to the Alabama show Jan 14. I haven't ever been so gonna try to bring the wife and daughter on the 3.5 hour trip from East Alabama.

 

[hrt4me]

Do you happen to have a 0.424 round ball mold?