• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

FOR SALE Pedersoli Kentucky Maple pistol. 45 caliber Price drop $450 shipped

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RobertIN

West Harrison, Indiana
MLF Supporter
Joined
Nov 1, 2023
Messages
585
Reaction score
1,135
Location
Indiana
Shoots steel well, front sight has been replaced with a silver blade, dovetail has not been peened. I never got around to sighting it in on paper. Removed the ugly cerakote and it's raw steel with some patina forming, ready for your finish of choice but is very handsome in the white. Sanded off the factory finish and treated with tannic acid/iron nitrate followed by Tried and True Varnish oil. Added 1/16" pins to reinforce the nose cape "tongue" and replaced the nose cap screw with one of higher quality.

Lock is a sparker and provides reliable ignition. Bore is clean and bright.

Transparency section:

Hairline crack at the tang and side plate, I relieved a bit of wood at the side plate to relieve the pressure and stabilize the crack. Scratch near the side plate where the chisel slipped. See photos.

Asking $450 shipped.
Thank you for your consideration, have a blessed day.

1000010486.jpg
1000010463.jpg
1000010462.jpg
1000010464.jpg
1000010488.jpg
1000010465.jpg
1000010466.jpg
 

Attachments

  • 1000010463.jpg
    1000010463.jpg
    4.6 MB · Views: 0
Last edited:
Good lookin wood. Unfortunate about the cracked tang
Indeed. Looks like the inlet is slightly crooked and putting lateral pressure off to the lock side. Heavy loads aren't recommended in these without underlugs anyway so I don't worry about it failing.
 
Last edited:
Back
Top