Pedersoli PA long Rifle trigger change

[barracudadave67]

Hi All
I don't like double set triggers, so I changed mine to a single trigger on my Pedersoli PA Long Rifle.I got all the parts from TOW. I had to lengthen the trigger plate. I tig welded some extra metal on the front and back of the plate.
I used TOWs Isaac Haines trigger, and trigger plate. Parts cost $21.00 plus shipping. Had to drill a swivel pin hole in the plate.
I had to fit the trigger for the correct pull, and posistion in the trigger space. Then I removed the fly on the tumbler, cause it made the let off to light. It turned out good. Trig pull is 4lbs, now.
Im happy with it.
Here's a couple pics, sorry I didn't get any of the welded plate.

Dave

 

[Pete G]

How did the fly make the trigger too light?

 

[barracudadave67]

The fly would not let the sear go into the full **** notch on the tumbler fully. If I just barely touched the trigger at full **** with the new trigger , it would go off. So I removed the fly. It works without the fly, and it has a 4-5 lbs trigger pull checked with my gage.

Dave