• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

FOR SALE Percussion .45cal $150.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 3, 2021
Messages
34
Reaction score
33
Location
Ky
I have a nice looking .45 cal percussion rifle, the barrel is approximately 13/16" and was draw filed and browned. Lock works as it should, rifle is a 2 piece stock and has a nice patina on the brass. The rifling can be readily be seen at the muzzle.
I have not shot this rifle and suggest anyone to proof test it as with all muzzle loaders. This rifle appears to be an older kit gun guessing its a cva or morku but no markings on it.
I will ship as long as it is legal to do so, or meet if your in the tristate area of NKy area.
Asking 150.00 plus shipping.
 

Attachments

  • IMG_20230412_055235.jpg
    IMG_20230412_055235.jpg
    1.7 MB
  • IMG_20230408_160136.jpg
    IMG_20230408_160136.jpg
    5.3 MB
  • IMG_20230408_160149.jpg
    IMG_20230408_160149.jpg
    4.7 MB
  • IMG_20230408_160159.jpg
    IMG_20230408_160159.jpg
    5.2 MB
It's a Miroku. That stubby trigger is a giveaway.

What does the barrel width measure in decimal form? .812? .875. Etc.

Is the bore bright and shiny?

Thanks.
Ill get additional picts and measurements when I get home and mic it. I do not have a bore light but will do my best to give you what you are requesting. Thanks
 
Ill get additional picts and measurements when I get home and mic it. I do not have a bore light but will do my best to give you what you are requesting. Thanks
Ill get additional picts and measurements when I get home and mic it. I do not have a bore light but will do my best to give you what you are requesting. Thanks
.892 outside barrel diameter
 

Attachments

  • IMG_20230414_182556.jpg
    IMG_20230414_182556.jpg
    529.7 KB
Looks like a deal but if I were selling I would post a few photos of the lock etc. up close to show condition, inletting etc. Why have you not shot this rifle yourself?? Course its probably sold by now.
 
Back
Top