I have just got a new Navy and the wedge is sticking out a bunch on the left side of the frame and only just comes to the edge of the right side of the frame. Just looks odd. Otherwise the pistols looks great. I did use a close pin and removed the wedge and tapped it back in with a slight tap of a rubber hammer. My Walker’s wedge doesn’t stink out as far. Just looking for any option. Thanks in advance!
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Pietta Navy 36 cal wedge ?
- Thread starter sekiar39
- Start date
Help Support Muzzleloading Forum:
bobthemotorcycle
40 Cal.
- Joined
- Dec 28, 2012
- Messages
- 396
- Reaction score
- 181
My Piettas all just barley clear the right side and man are they tight.
Attachments
As long as the wedge draws everything up tight without binding the cylinder you are OK but I can understand your not liking it sticking out so far. I have a number of Piettas in which the lug goes through enough that the spring latches on the frame or almost does and an equal number in which the wedge only comes flush with the right side. If it bothers you take a file and carefully remove metal from one face of the wedge or the other till it goes in (not much) further. Touch it up with some cold blue and it won't affect the function at all. I have two Pietta 60 Armys, consecutive serial numbers, on one the wedge is flush on the right and the other it's far enough through the spring is on the verge of snapping over the edge of the lug. All the parts have a manufacturing tolerance, a maximum and minimum size, and when they start assembling guns a maximum wedge in a minimum slot just won't go in as far and it doesn't take much.
Hawkeye2 thanks for your suggestions. For now I'll probably just leave it as is. Maybe after I shoot it I'll make the adjustment. This is my first Pietta and for the money I'm happy so far.
With suppliers having difficulty, be happy you have the revolver. And inflation
is jacking up the prices of everything. The wedge won't be noticed except by you.
AS hawkeye 2 says you can file it up a little-- but I would leave it be and shoot it.
is jacking up the prices of everything. The wedge won't be noticed except by you.
AS hawkeye 2 says you can file it up a little-- but I would leave it be and shoot it.
GothamDriver
32 Cal
- Joined
- Apr 25, 2022
- Messages
- 11
- Reaction score
- 10
I’ve run into this as well, and super tight!
- Joined
- Aug 22, 2004
- Messages
- 1,366
- Reaction score
- 188
I've got quite a few open top smoke-wagons, and it seems to me the wedges fit each of them just a little bit different. Really almost an art rather than a science, as far as the fit.
- Joined
- Feb 2, 2021
- Messages
- 735
- Reaction score
- 650
Mine, too.
doubleset
50 Cal.
A wedge isn't exactly a precision fastener.
Doesn't need to be. Tight is tight and that's it's job . . . holding the barrel assembly tight against the arbor. So, it's "right" wherever it
ends up (tight) until it bottoms out and you need another.
That non-precise part can maintain a .0015" endshake on an open top revolver.
Mike
