Popping figured Maple with Aquafortis

[seaguy]

I ran across an article on a different page that was on the use of Aquafortis (from TOW)for popping figured maple. I found it very helpful and thought some of you might like to check it out so go here: http://www.akfiles.com/forums/showthread.php?t=141943

 

[necchi]

Thank's for sharing,, but the multiple the guy does isn't really needed. (he's doing up too 5 coats!)
A search here can find a lot of AF advise from some of our resident pro's.

 

[seaguy]

Thanks Necchi, I wasn't suggesting using his AK finishing method, only how he used Aquafortis. I realize this is a belabored topic but I found it useful since TOW,as the guy mentions, doesn't go into the "baking soda neutralizing" to stop the darkening process when you have what you want. I also liked his attention to the heating process. I assumed that most here are not building AKs and would ignore that part. It's the best demo of Aquafortis that I have come across anywhere.

 

[50cal.cliff]

Buckeye this is more than likely going to get pulled. No links to something that is not about traditional muzzle loading!
I know you are just trying to bring across the AF side of this post but,............ there are some who do nothing but look for posts to complain about, and as soon as he sees this one! :stir:
Good info on AF none the less!