I picked up some quills from a friend that shot one and was wondering if anyone has done any decorating with these. I'm afraid to start the project without any insight before working with the quills. I don't feel like burying the burrs in my fingers and not be able to get them out. Any comments would be appreciated.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
porcupine quills
- Thread starter Dayne
- Start date
Help Support Muzzleloading Forum:
Hey renegade, I'm sure that Okwaho will have some valuable advice once he sees tyhis threadm bu in the mean time, here's how I handled mine:
Wash 'em in a soapy solution to clean 'em up then soak 'em in colors of your choosing, they take a dye very well. after they've dried, sort 'em by size and thickness (for uniformity's sake" and nip off the ends with nail clippers. you'll need to flatten 'em before you start working with 'em, so you'll need something rigid for that purpose. I used to use my teeth, but haver since changed that practice considering the possible infections and dieses I might have contacted.
I started off practicing folding the quills by wrapping them around a wooden coffee stirrer, though these are getting pretty scarece anymore.
I'm sure you'll get more, and better advice from the more knowledgable quill workers, but this was how I get started.
Goodluck :hatsoff:
Wash 'em in a soapy solution to clean 'em up then soak 'em in colors of your choosing, they take a dye very well. after they've dried, sort 'em by size and thickness (for uniformity's sake" and nip off the ends with nail clippers. you'll need to flatten 'em before you start working with 'em, so you'll need something rigid for that purpose. I used to use my teeth, but haver since changed that practice considering the possible infections and dieses I might have contacted.
I started off practicing folding the quills by wrapping them around a wooden coffee stirrer, though these are getting pretty scarece anymore.
I'm sure you'll get more, and better advice from the more knowledgable quill workers, but this was how I get started.
Goodluck :hatsoff:
Before using, clip off both ends, especially the exposed barbed end.
Arggh, spruce pigs. Many a bad memory of dogs and quills. (killed every porky I could in Alaska)
One can stick themselves deeply with a quill and never know it, until you try to remove. (as said, barbed on the end) If you should impale yourself, cut off the exposed end of quill first to collapse it, they are hollow and swell when moist. (read as in moist flesh)
Quills do make good vent picks, one porky tail would supply a battalion of rock lockers, for life.
Arggh, spruce pigs. Many a bad memory of dogs and quills. (killed every porky I could in Alaska)
One can stick themselves deeply with a quill and never know it, until you try to remove. (as said, barbed on the end) If you should impale yourself, cut off the exposed end of quill first to collapse it, they are hollow and swell when moist. (read as in moist flesh)
Quills do make good vent picks, one porky tail would supply a battalion of rock lockers, for life.
Guest
I don't do quillwork either but my wife does. She recommends, "The Quillworkers Companion" unknown author, or a book by William C. Orchard,"The Technique of Porcupine Quill Decoration among the Indians of North America". They both show the various stitches in detail and are very good instructional aids to learn the craft. Or the very best way is to go north and live with the Cree for awhile. I hope this will help you.
Good luck!
Good luck!
mspowderhorns
32 Cal.
- Joined
- Aug 28, 2006
- Messages
- 11
- Reaction score
- 0
the 'A Quillwork Compannion' is by Jean Heinbuch...It is the best ....Orchards book has some nice pics of orig work but is about worthless with the instructions given...give it a try..'nothing ventured-nothing gained'
nativetech.org has info and instructions on quillwork techniques.
Last edited by a moderator:
Also consider reading the very fine chapter on quillworking in "The Book of Buckskinning III."
