When I made the horn I was going for a working man’s type of horn, somthing that has been used, that being said, I left a few nicks here and there and a few gouges as well.The base plug is walnut, pinned in with steel nails, also has a staple that will hold the strap. This horn is very slender and measured 11” from tip to base.It’s not as shiney as some of the pics make it look, it has a satin sheen to it.This horn can be carried right or left hand side, but I prefer the left. The antler measure was filed and carved by me,it throws 50 grains and has octagon flats to round,then dyed. There is a hole drilled and thong attached at the bottom of the measure.The only thing you need now is a strap! I had thought of keeping these..but bills say otherwise. I’m not a great photographer, so if you need any other pics let me know and I’ll do my best. 125$ Includes shipping to the CONUS Thanks!
Attachments
-
image.jpg -
6F365CD1-240C-40C4-A41A-AA5C0740B114.jpeg -
089D6BAB-4D69-444E-B50A-0F6C360806DF.jpeg -
9669F317-2365-4390-A620-ECC58F7CDD48.jpeg -
E318725A-3E4E-4986-A70B-7324F832FCDE.jpeg -
89FE28EB-00AD-475D-A1EF-F7DEE72FCA50.jpeg -
02FCB95B-69CD-4326-9D97-37FB73B18CD3.jpeg -
E00B2C4D-18F7-4C3F-A9DB-3CE918299A64.jpeg -
C383D3D4-E208-4D15-A394-D384F5F02937.jpeg
Last edited:
