• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Powder Horn w Deer engraving

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Nov 17, 2016
Messages
1,877
Reaction score
2,285
Location
N.C. and elsewhere
This horn is approximately 11inches with a 2 inch base. There is a buck deer engraved. The stopper has a copper rod for a sure fit. The stopper is attached with heavy waxed cotton line. There is a dark brown suede leather strap attached with staples. If the deer picture is showing the tip curves slightly left. So hanging on your right side the deer is facing your body and the tip is tucked in. Left side shows the deer picture and the tip turns outward. $80

5-ACF78-DA-B83-E-4899-A32-B-7-B10-DDBF6-EB1.jpg


9-AF22-AEC-30-E2-459-D-8-A01-A72-C4-F355667.jpg


A9-E3-EC9-B-FF87-466-E-A20-F-46-F23788053-E.jpg


B33929-E4-38-D0-42-EB-959-F-93-CD18-C032-C9.jpg


D987-C881-4-B84-4009-B7-D4-8-FACA35-CB938.jpg
 
Status
Not open for further replies.
Back
Top