So I have the Zoli 10 gauge (.765). It apparently has some pitting in the bore and I'm thinking of having it relined to 12 or 20 gauge. I like that big bore, but it's kind of an odd duck in my collection. Having the bore size consistent with my other guns would make life a little easier. What do you think? Thanks
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Relining A Big Bore Shotgun
- Thread starter Walkabout
- Start date
Help Support Muzzleloading Forum:
- Joined
- Jan 26, 2019
- Messages
- 478
- Reaction score
- 369
Bobby Hoyt might be able to do that for you. Personally if it were mine and it’s safe to shoot I would keep it 10 gauge
- Joined
- Jan 28, 2022
- Messages
- 87
- Reaction score
- 74
I agree with Stank!
- Joined
- Mar 23, 2021
- Messages
- 2,776
- Reaction score
- 5,916
Only if the pitting is very very bad, most times it will not hurt anything to shoot it as is. I would worry about the increase in weight.
Last edited:
Phil Coffins
69 Cal.
Lining it to 20 gauge would make it rather heavy and muzzle heavy to boot.
Sam squanch
69 Cal.
- Joined
- Oct 9, 2019
- Messages
- 3,167
- Reaction score
- 4,522
Light to moderate pitting will not hurt anything. I have an unmentionable 20 gauge I use in the wood hauler truck, pitted a bit, never clean it. It patterns fine.
