Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Thank you for the replies. I ran out and picked up a fresh bottle of titebond 2 and have the chip clamped up. I’ve been taking the stock out using the method shown by Jim in his videos, turning the stock upside down and rapping the top of the butt on a padded portion of the bench.Some great suggestions here, I will give the magnet and dowel a try to help with final extraction. I did already relieve the inside and bottom edges of tang and breach plug slightly, I might hit these again with the file before my next test fit.I think the grain runout, particularly on the left side of the tang area is less than ideal for this, combined with my novice approach.
Thank you for the replies. I ran out and picked up a fresh bottle of titebond 2 and have the chip clamped up. I’ve been taking the stock out using the method shown by Jim in his videos, turning the stock upside down and rapping the top of the butt on a padded portion of the bench.
Some great suggestions here, I will give the magnet and dowel a try to help with final extraction. I did already relieve the inside and bottom edges of tang and breach plug slightly, I might hit these again with the file before my next test fit.
I think the grain runout, particularly on the left side of the tang area is less than ideal for this, combined with my novice approach.
