Hello. I'm new to black powder shooting. I recently purchased an 1851 pietta navy revolver, steel frame 36. I did not realize the trouble it would be to find percussion caps when I purchased. Doesn't matter, I'd still buy the gun if I have known. I absolutely love the gun. But if someone could please help and direct me to where I could find some, I'd appreciate you. I've seen some post of people selling the cap without primer and I'd be cool buying some of those off someone if anyone interested in selling. I don't know how to send a private message on here but did see wolfman may have some for sale. Thanks in advance for any help.
Revolver percussion caps
- Thread starter Jacobcp23
- Start date
Help Support Muzzleloading Forum:
- Joined
- Oct 13, 2007
- Messages
- 384
- Reaction score
- 399
Wolfman has been selling the empty cups. If he no longer does that,I can send you enough to last you a long while. When it comes to filling them the prime all from 22 reloader work the best. Some of the other ways don't work so good. This subject has been worked over a lot lately.
- Joined
- Mar 21, 2022
- Messages
- 1,558
- Reaction score
- 1,879
GunBroker. You will have to pay but you can get them.
Heck yes, thank you. I spoke with a guy that lives close to me on this forum that may be able to hook me up with some cci. So I'm going to try to meet him and I'd rather just buy some without primer from one of y'all on here then buy that 22reloader tool. That tool looks great but I've researched it and may not get to my house for months. Id like to get a close look at the caps before I buy that tool if I decided to. I think I could make due without the tool and if it came to it make a hardwood tool to make the shape in the future. I know the subjects been worked over a lot but it's helped me. I've spent too much time researching caps. Found charts, a lot of videos of people showing what they're doing to make them. I've looked at conversion cylinders, the 22lr cylinder looked cool, come with little barrel and I don't think I would have to take cylinder off to load or open gap more to load but it cost about as much as I paid for the gun.
Bighorserider
40 Cal
I too recently got a 51 Navy. I notice the factory nipples require #5 caps. I replaced them with Slixshots which take the much easier to find but still #11s.
Bighorserider, did you purchase the Pietta 1851? All my research has shown factory nipples to be either 10 or 11 depending on brand with most people saying Remington 11. Really most people say when you get the revolver first thing to do, take the nipples off and replace with new nipples that use 11 caps. I've seen a lot of good reviews for those Slixshots also. I may end up changing to those. I've had a very hard time finding caps in 10 or 11. I've found none. I found a site that had musket caps which had bad reviews and it looked like no one wanted that brand. There's an older gentleman on yt that does a few videos showing his wood design cap maker which looks easy to make and it looks to work well to make the caps.
- Joined
- Jan 30, 2021
- Messages
- 1,045
- Reaction score
- 1,118
#5 ?
- Joined
- Mar 21, 2022
- Messages
- 1,558
- Reaction score
- 1,879
Don't you mean the factory nipples use #10 caps?
I was also wondering what #5 are? I haven't researched anything saying. 5. Did you mean 10?
Replay13
32 Cal
- Joined
- May 3, 2022
- Messages
- 8
- Reaction score
- 10
I had the same problem and I ordered the cap making tool a little over a month ago. I ordered on a Friday and it shipped on the next Tuesday. I had it here in about a week. That was a nice surprise! Now I've shot a few hundred of the caps and they are working great! I use the Prim-All but I don't use their hardener. That is working great.
Last edited by a moderator:
Blackpowder77
32 Cal
- Joined
- Feb 23, 2022
- Messages
- 36
- Reaction score
- 52
RWS 1055 WORK GREAT , i have a large supply of them
My Pietta Remington new army works great with Remington #10 on factory nipples which I will change to slickshots someday. Glad I stocked up on caps!
- Joined
- Mar 21, 2022
- Messages
- 1,558
- Reaction score
- 1,879
I have a good supply of #10 and #11 caps and should be good for a while. I do keep my eye out for more.
- Joined
- Mar 21, 2022
- Messages
- 1,558
- Reaction score
- 1,879
He must have some supply of them as he has been selling them steadily for at least two weeks. What gets me is others are still bidding $35 plus shipping on other sellers's single tin CCI #10 cap offerings.
- Joined
- Jan 9, 2008
- Messages
- 1,940
- Reaction score
- 2,188
RWS caps #1075. I have a large supply of them.
Paul Nelson
Live Free or Die .54 cal
- Joined
- Mar 3, 2021
- Messages
- 88
- Reaction score
- 140
The company that sells prim all also sells cap makers in #10 & #11. I purchased the #10 cap maker and prime all. It worked great in my 1851 Colt Navy replica. My next test would be to see how well it will work with paper cartridges.
Bighorserider
40 Cal
I ordered my Navy from Taylor's in Dec. It's the only CB revolver I've ever handled. I only had #11s and 12s on hand. The 11s would just fall off the nipples. Slixshot web site said theirs would fit 11s. I had both CCI and Remingtons on hand. Both work fine.
He said that he bought them in trailer loads on pallets
are they still even made?
