• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

CLOSED Rogers and Spencer

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

Jappo

Poco Loco
MLF Supporter
Joined
Oct 24, 2022
Messages
1,466
Reaction score
1,288
Location
Texas
TRADE PENDING
I have this Rogers and Spencer, I think it's a Euroarms. Not sure and it might have been a kit? The barrel has machine marks as does a little bit on the frame. I traded for this on an impulse. Had it over a month. Have not personally shot it but it has been fired. The loading lever retaining screw is not the original but it works just as good. I'm asking what I have in it. Which is $425 shipped. I'll just be out the shipping.
 

Attachments

  • 20231023_143233.jpg
    20231023_143233.jpg
    2.4 MB
  • 20231023_143351.jpg
    20231023_143351.jpg
    2.2 MB
  • 20231023_143347.jpg
    20231023_143347.jpg
    2.2 MB
  • 20231023_143343.jpg
    20231023_143343.jpg
    2.3 MB
  • 20231023_143337.jpg
    20231023_143337.jpg
    2.3 MB
  • 20231023_143332.jpg
    20231023_143332.jpg
    2.2 MB
  • 20231023_143320.jpg
    20231023_143320.jpg
    2 MB
  • 20231023_143314.jpg
    20231023_143314.jpg
    2.4 MB
  • 20231023_143259.jpg
    20231023_143259.jpg
    2.3 MB
  • 20231023_143252.jpg
    20231023_143252.jpg
    2.3 MB
Last edited:
I have this Rogers and Spencer, I think it's a Euroarms. Not sure and it might have been a kit? The barrel has machine marks as does a little bit on the frame. I traded for this on an impulse. Had it over a month. Have not personally shot it but it has been fired. The loading lever retaining screw is not the original but it works just as good. I'm asking what I have in it. Which is $425 shipped. I'll just be out the shipping.
 

Attachments

  • 20231023_144356.jpg
    20231023_144356.jpg
    787.4 KB
  • 20231023_144022.jpg
    20231023_144022.jpg
    2.3 MB
  • 20231023_143442.jpg
    20231023_143442.jpg
    1.8 MB
Status
Not open for further replies.
Back
Top