• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Screw tip powder horn price drop to $100

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Sep 8, 2012
Messages
181
Reaction score
193
I was given this horn years ago by Roland Cadle and just never used it. It’s a very well made screw tip horn, approximately 18” from tip to butt. No damage and never used as far as I can tell. Here’s the rub, I THINK this was made to be a left carry horn but someone tried to turn it into a right carry and while it might work for someone it doesn’t fit me well. It’s a super nice horn, comes with the strap but I will never use it. I’d like $100 shipped. If you need more pictures just ask. I can do PayPal, check, money order etc…
 

Attachments

  • 8E352E38-CF1E-4D10-96CB-283155F7612D.jpeg
    8E352E38-CF1E-4D10-96CB-283155F7612D.jpeg
    193.2 KB
  • B3FE92CE-2575-4868-83A1-68F30A22E7B9.jpeg
    B3FE92CE-2575-4868-83A1-68F30A22E7B9.jpeg
    189.3 KB
  • 06DA8B76-FF47-42A3-A146-DE7D8A714558.jpeg
    06DA8B76-FF47-42A3-A146-DE7D8A714558.jpeg
    191.9 KB
  • FD3826E4-6586-4790-8CC3-8370CA6B63C7.jpeg
    FD3826E4-6586-4790-8CC3-8370CA6B63C7.jpeg
    86.1 KB
  • 4A8B70B3-5B20-4552-BAB5-CB6E72461C91.jpeg
    4A8B70B3-5B20-4552-BAB5-CB6E72461C91.jpeg
    127.3 KB
  • C084A904-8420-445B-8AFA-AEC1FD048942.jpeg
    C084A904-8420-445B-8AFA-AEC1FD048942.jpeg
    153.6 KB
  • A7F534BA-F069-4950-896E-FD69173275AF.jpeg
    A7F534BA-F069-4950-896E-FD69173275AF.jpeg
    65.8 KB
  • 3D3ED794-EC34-4E9B-AC6C-D8098BF8EA34.jpeg
    3D3ED794-EC34-4E9B-AC6C-D8098BF8EA34.jpeg
    55.8 KB
  • 7E7005ED-B544-4A16-B817-C592F46CC4EB.jpeg
    7E7005ED-B544-4A16-B817-C592F46CC4EB.jpeg
    137.3 KB
Last edited:
What are the two pin holes or staple holes for? Did it have a staple type of fixture at one time?
 
Do you have pictures where someone is modeling it? I'd like to see it on someone right handed if possible.
 
Status
Not open for further replies.
Back
Top