The plan and most of the hardware was from Track of the Wolf, for the Fullstock Hawken . I bought the barrel from Rice Barrel Co. I made the pipes, toe plate and side plate. I've only heard good things about their pre carved stocks but mine was not pre carved. For me one of the hardest parts was inletting the dang tang! It had to be bent a few times, being a hooked breach, it was a challenge, for me anyway.
I hope I have the frizzen issues resolved. There was some evidence of the main spring rubbing in the lock mortise so I relieved that and I tried a different length flint. But the big thing I found was the frizzen actually fully opens but is bouncing back to the point I didn't think it was opening. Had to put a piece of paper on the frizzen spring and fire the lock, the paper has a mark from the frizzen but it goes back to almost closed.