Shot Card Magazine

[Hawthorn1213]

Hello All,

I wanted to share the Shot Card magazine I built not too long ago in hopes it might inspire others like those on here that have inspired me. I wish I could find the original post/member that sparked the idea for me and if I can find the post I'll come back and add a link.

More or less, this is just a dumbed down change dispenser (like the ones sonic waitresses used to wear) but instead it allows me to stack my shot cards in sequence of how I load my Pedersoli SxS. The construction is just .875 copper pipe that's been capped on one end. The other end is a cap, but it's been modified to retain the shot cards while still allowing access for my thumb to grab the top card. The cards are held under tension by a spring allowing only one to come out a time. The end that's removable is held on by two pins silver soldered to the magazine tube, and notched on the cap side to lock out when twisted.

It's pretty dang handy and made a noticeable difference in loading during last years dove and quail season.

 

[cgoff]

Great idea. Way better than my snuff tin

 

[oldwood]

Now that's unique , a card wad dispenser. Obviously , way above my pay grade. Back when I used to hunt small game w/a m/l sbs 12 ga. , and also a 10 ga. , just used to keep loose wads in my shot pouch. In the late 1970's , ya didn't see too many hunters using Black Powder shotguns out there. Nobody to ask questions to , except the occasional magazine article , and the back pages of the Dixie Gun Catalog. Again.....very unique

 

[bronko220002]

Interesting and clever

 

[snakebit]

Don't think I'll show a photo of the ziplock sammich bag I use....

 

[PathfinderNC]

Don't think I'll show a photo of the ziplock sammich bag I use....

Oh so I’m not the only one….

 

[Brokennock]

Interesting.
I used to use a cigar tube that was the perfect diameter for my 20 gauge cards, wads, and balls. I also placed them in order of need....

No cool spring and magazine follower though.

 

[Dusty_Traveler]

Man, that's pretty dang sparky! Those would sell well. In fact, can I put in an order?

 

[Britsmoothy]

You should sell them

 

[Dusty_Traveler]

I'd buy a 12 and a 10. For sure.

 

[Smokey Plainsman]

Wow, that’s a happenin’ wad magazine. Love it!

 

[Fisherking]

I’d love one of those!

 

[Mad Hatter]

One 12 gauge please.

 

[ezekiel]

very clever and I agree they would really sell !

 

[Brokennock]

It's like a Pez dispenser, only better

 

[snakebit]

If you decide to sell a few, I'd be interested in a 12 gauge one also. You should probably patent that.

 

[Billy-by-gosh]

Love it! So handy and clever - I'd love that for 20GA too. Your execution of the design is perfect!
Possible suggestion: it might load even slicker if the base was removable and had the spring attached to it with solder/epoxy, that way wads could go into the bottom of the tube without fighting spring preload.

 

[ZUG]

Great idea - you sir are a "thinker" and a "maker" for sure

 

[Newtire]

Hello All,

I wanted to share the Shot Card magazine I built not too long ago in hopes it might inspire others like those on here that have inspired me. I wish I could find the original post/member that sparked the idea for me and if I can find the post I'll come back and add a link.

More or less, this is just a dumbed down change dispenser (like the ones sonic waitresses used to wear) but instead it allows me to stack my shot cards in sequence of how I load my Pedersoli SxS. The construction is just .875 copper pipe that's been capped on one end. The other end is a cap, but it's been modified to retain the shot cards while still allowing access for my thumb to grab the top card. The cards are held under tension by a spring allowing only one to come out a time. The end that's removable is held on by two pins silver soldered to the magazine tube, and notched on the cap side to lock out when twisted.

It's pretty dang handy and made a noticeable difference in loading during last years dove and quail season.
View attachment 235694
View attachment 235695
View attachment 235696

This ranks right up there with laces on boots, pockets on shirts, sliced bread and a few other things of a similar nature. Black powder shooters have needed this!

 

[springfield art]

Hello All,

I wanted to share the Shot Card magazine I built not too long ago in hopes it might inspire others like those on here that have inspired me. I wish I could find the original post/member that sparked the idea for me and if I can find the post I'll come back and add a link.

More or less, this is just a dumbed down change dispenser (like the ones sonic waitresses used to wear) but instead it allows me to stack my shot cards in sequence of how I load my Pedersoli SxS. The construction is just .875 copper pipe that's been capped on one end. The other end is a cap, but it's been modified to retain the shot cards while still allowing access for my thumb to grab the top card. The cards are held under tension by a spring allowing only one to come out a time. The end that's removable is held on by two pins silver soldered to the magazine tube, and notched on the cap side to lock out when twisted.

It's pretty dang handy and made a noticeable difference in loading during last years dove and quail season.
View attachment 235694
View attachment 235695
View attachment 235696

Really cool and clever!