• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Shot over batting

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mad Irish Jack

40 Cal.
Joined
Nov 25, 2004
Messages
709
Reaction score
137
Location
Western PA (McDonald, PA)
Has anyone in this forum tried using a cotton batting (padding material used in sewing quilts and such) between the wad and shot? :hmm:
I learned of it on another forum. You use a one inch square of the material (about 3/4" thick) over the cushion wad and this seems to hold the shot together longer. One/sixth of a yard (about $1.00+/-) gives you about 216 squares to try and pattern your charges. These give me an extra 10-13 yards of range. This is big wether you shoot clays or game. :thumbsup:
 
Has anyone in this forum tried using a cotton batting (padding material used in sewing quilts and such) between the wad and shot? :hmm:
I learned of it on another forum. You use a one inch square of the material (about 3/4" thick) over the cushion wad and this seems to hold the shot together longer. One/sixth of a yard (about $1.00+/-) gives you about 216 squares to try and pattern your charges. These give me an extra 10-13 yards of range. This is big wether you shoot clays or game. :thumbsup:

Never tried that but it sounds like it would work...I followed some tips and experimented with paper shot cups for my .62cal/.20ga, resulting in eight #6's in coke cans at 40yds.

But something like the batting would be much easier to carry and use I suspect...for that matter, even using a thick or double thickness of appropriate size patches would probably work...anything that creates the "effect" of a reduced sized bore instead of the wide open cylinder bore would produce tighter patterns...something to experiment with this summer!!
:redthumb:
 
Has anyone in this forum tried using a cotton batting (padding material used in sewing quilts and such) between the wad and shot? :hmm:

Make sure it is pure cotton when you buy it, synthetic cotton (rayon) will melt if the powder's gas hits it...
 
Thanks Musketman. :front: I should have put '100% cotton batting' when I wrote it. I guess when you've been doing something for a long time and are on a forum like this, you eventually take it for granted that everyone else has that knowledge. But you were correct in stating that it should be 100% cotton. Any item used as wadding, patching material or other cushioning aid, should be 100% natural. Items, such as cotton, linen, leather, bee and wasp nest material, are all acceptable materials. :)
 
Back
Top