Reply to thread

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

Good info here. Urge you study pin on by Zonie. I have most all the cards and wads for 12 gauge. We should get out to the range to pattern and test a cylinder bored shotgun. I'd use 2F Goex or Schuetzen in it. Old blueprint paper or 4 foot square cardboard tacked to patterning board at Lupton range. Set up for 25 yards. Estill Ator recommended going up one gauge. I'll have to order some 10 gauge loading for an 11 gauge double barrel. You can order wads from Track or directly from those that supply TOTW. I like Circle Fly. Using lubed thick cushion wads between the powder and shot will blow holes in your pattern. I pin a safety pin on my hunting and game vest when chasing pheasants for perforating the over shot cards. Have Trius thrower and clays once you get it patterned.

<blockquote data-quote="beardedhorse" data-source="post: 2586942" data-attributes="member: 26934"><p>Good info here.&nbsp; Urge you study pin on by Zonie.&nbsp;&nbsp; I have most all the cards and wads for 12 gauge.&nbsp; We should get out to the range to pattern and test a cylinder bored shotgun. I&#039;d use 2F Goex or Schuetzen in it.&nbsp; Old blueprint paper or 4 foot square cardboard tacked to patterning board at Lupton range.&nbsp; Set up for 25 yards.&nbsp;&nbsp; Estill Ator&nbsp; recommended going up one gauge.&nbsp; I&#039;ll have to order some 10 gauge loading for an 11 gauge double barrel.&nbsp; You can order wads from Track or directly from those that supply TOTW.&nbsp; I like Circle Fly.&nbsp;&nbsp; Using lubed thick cushion wads between the powder and shot will blow holes in your pattern.&nbsp; I pin a safety pin on my hunting and game vest when chasing pheasants for perforating the over shot cards.&nbsp; Have Trius thrower and clays once you get it patterned.</p></blockquote><p></p>

[QUOTE="beardedhorse, post: 2586942, member: 26934"] Good info here. Urge you study pin on by Zonie. I have most all the cards and wads for 12 gauge. We should get out to the range to pattern and test a cylinder bored shotgun. I'd use 2F Goex or Schuetzen in it. Old blueprint paper or 4 foot square cardboard tacked to patterning board at Lupton range. Set up for 25 yards. Estill Ator recommended going up one gauge. I'll have to order some 10 gauge loading for an 11 gauge double barrel. You can order wads from Track or directly from those that supply TOTW. I like Circle Fly. Using lubed thick cushion wads between the powder and shot will blow holes in your pattern. I pin a safety pin on my hunting and game vest when chasing pheasants for perforating the over shot cards. Have Trius thrower and clays once you get it patterned. [/QUOTE]

Verification