• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WANTED small powder horn

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
9 3/4" long. Asking $30 shipped
100_2153.JPG
 
A 6" horn is going to hold a lot more powder than for 10-12 shots, unless you're shooting a very large bore (.58 or larger)

This is one of the smaller horns I put together

JiLMCozm.jpg


You may be better off with a small/flat horn, like this $10 (new) example:

https://www.medievalcollectibles.co...7fOdXFQna2IWl_qhNRuVWwMJiLvQoUtBoCy1YQAvD_BwE
shopping


Measurements:
  • Length: 3.5 Inches
  • Width: 0.6 Inches
  • Horn Height: 5.3 Inches
  • Overall Height: 6.5 Inches
  • Volume: 18.6 Fluid Ounces
  • Cord Length: 13 Inches
 
Nope, but FWIW, I've never got a bad factory horn that was newly-made, so I wouldn't sweat it (YMMV, of course)

Besides, @ $10 with free shipping, how can you lose ?
 
Back
Top