Expecting my first handgonne in a couple weeks. It is a .50 cal. Anyone shooting a .50 have a good starting load to begin with? Never shot one before and wasn't sure how the loads would compare to a rifle. Appreciate any suggestions.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Suggested starting load
- Thread starter joeboleo1
- Start date
Help Support Muzzleloading Forum:
Teleoceras
45 Cal.
joeboleo1:
Nice! FFFg B.P. is recommended although FFg will do as well. If the barrel is as short as my .50, then I would recommend 30 grns and go from there to work up your load. This is a smoothbore, so you can either go with either a .495 bare ball or go smaller and use a patch.
I've had better accuracy with a patched ball.
Good luck!
Slowmatch Forever!
Teleoceras
Nice! FFFg B.P. is recommended although FFg will do as well. If the barrel is as short as my .50, then I would recommend 30 grns and go from there to work up your load. This is a smoothbore, so you can either go with either a .495 bare ball or go smaller and use a patch.
I've had better accuracy with a patched ball.
Good luck!
Slowmatch Forever!
Teleoceras
Similar threads
