• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Tennessee bean rifle

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Old Wyatt

32 Cal.
Joined
Aug 9, 2018
Messages
17
Reaction score
5
I picked up this rifle last week for Im almost ashamed $125.00 it looks like the rifle on sitting fox. Muzzleloaders website. Bore is spotless sorta plain wood a little striped I believe it has a Siler lock. Anyone out there aquainted with this?
Broken Rod
 
Based on your first post, it would seem as if you scored a great deal. A Siler lock, pristine barrel and decent architecture for only $125. You may have quite a bargain. But as I stated earlier, we really can't form an evaluation without photos or a performance report from the range.

Private message one of us to get an email address to send us a picture. We can use our third party hosting service to place a photo of your rifle on the forum.

Yes, I would have likely paid the price you paid for a rifle meeting the description in your first post.
 
Well I asked for you to send us some pictures. I'll post the two pictures you sent me.

30153561628_dde17a6682_c.jpg


Your rifle looks pretty good.

43303355584_8634f73c29_c.jpg


A few scrapes on the frizzen means the builder tried it out to verify sparking.

Now its time to get the necessary accoutrements to go shooting.

Measure (measure that is calibrated from 10 to 100 grains in 5 grain increments) You will likely only need about 40 grains for your 36 caliber rifle.

Real black powder - grade 3fg for shooting and priming.

Patching for loading (I like JoAnne's Pocket drill utility cloth or 0.015" thick 100%cotton pillow ticking)

0.350" diameter round balls.

Black English Flints (measure the width of frizzen for approximate size. If ordering from a supplier make a request for selection of flat topped flints)

Spit will work for your patch lube, damp patches not sloppy wet.

Let us know how this rifle performs.

Looks as if you scored a fine rifle.
 
In response to Broken Rod

"Sorta plain wood" you say? I'd be tickled pink. Eye of the beholder! You done good.
 
That looks to be a Corinth Gun.
Does it have
J. Garner....
M. Avance....
J. Brown.....

One of the 3 names on the top barrel flat?
 
Thanks for the comments I received .350 round balls from totw yesterday have pillow ticking plenty of powder. Ill let ya all know how it does when i ear it back and let her bang.
Broken Rod
 
Back
Top