Thompson Center Round Ball 1:66

[UndeadPoet]

Yeah, that is a “2nd variation low swept back spur” hammer. Not sure of the years, but thinking starting in early 90s maybe? I have seen a 25th Anniversary Hawken (obviously from 1995) that had one.

 

[Treetop]

I’m curious about any markings on the bottom flat of the barrel, and are there any in the barrel channel of the stock? The TCs have had shamrocks, maltese crosses, etc. stamped on the barrel, usually by the barrel lug. That helps to date (sorta) and ID the barrel maker.

Is the hardware brass or ferrous? Will a magnet stick to it?

Hardware is steel,,, will search for some markings tomorrow.

 

[harleynut]

Deester Bees on the facebook thompson center group can tell u year and anything else you need to know hes the tc pro

 

[Treetop]

I’m curious about any markings on the bottom flat of the barrel, and are there any in the barrel channel of the stock? The TCs have had shamrocks, maltese crosses, etc. stamped on the barrel, usually by the barrel lug. That helps to date (sorta) and ID the barrel maker.

Is the hardware brass or ferrous? Will a magnet stick to it?

So far, no markings have been spotted, I'll give her a triple check with light & glass next time I visit. I also have an older model T/C Hawken in .45 cal. This too has no visible makers mark.

 

[sqqy14]

I have a T/C Hawken custom from 1994 made by Fox River outfitters. This gun is different, mine has color case hardened trigger guard
and thimbles and fancier walnut. You have a beautiful and very rare piece. Congratulations.

 

[Treetop]

I have a T/C Hawken custom from 1994 made by Fox River outfitters. This gun is different, mine has color case hardened trigger guard
and thimbles and fancier walnut. You have a beautiful and very rare piece. Congratulations.