• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD TOW Kentucky Flintlock Pistol Kit

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Dec 12, 2018
Messages
862
Reaction score
763
Location
York County Pennsylvania
I have for sale one of my projects that I'll never get started let alone finish. This was to be my Pennsylvania Flintlock Deer season pistol. It is a Track of The Wolf Kentucky Pistol kit. The stock is nicely figured maple, all of the parts are from Track, except the small Siler Flintlock came from Jim Chambers assembled, and the barrel that Bobby Hoyt made for me. A 7/8" 50 caliber , 1 in 20 twist, you can see Mr. Hoyts trademark narrow land and wide groove rifling. His barrels are shooters. This kit purchased from Track now runs well over $700 with the Green Mountain barrel. I'm asking $550 and $20 towards the shipping. I'll ship it anywhere a USPS Large Flat Rate Box will Take it.


Please see the photos and private message me with any questions. The finished pistol photo is from Tracks Catalog

Thanks,
O.R
 

Attachments

  • IMG_4380.jpg
    IMG_4380.jpg
    139.8 KB
  • IMG_4379.jpg
    IMG_4379.jpg
    132.9 KB
  • IMG_4382.jpg
    IMG_4382.jpg
    58.4 KB
  • IMG_4387.jpg
    IMG_4387.jpg
    60.4 KB
  • IMG_4388.jpg
    IMG_4388.jpg
    61.1 KB
  • IMG_4389.jpg
    IMG_4389.jpg
    154.4 KB
  • IMG_4390.jpg
    IMG_4390.jpg
    118.3 KB
  • TRACK Pistol.jpg
    TRACK Pistol.jpg
    72.9 KB
  • IMG_4391.jpg
    IMG_4391.jpg
    191.3 KB
  • IMG_4392.jpg
    IMG_4392.jpg
    171.1 KB
Last edited:
Additional NC Material, Information, and photos added to the offer.
To make this a complete package, I'm including this 2 CD set Building Flintlock Pistols with Mike Miller for no additional cost. This is a $30 set.

Please see below and the Photos in my above message

Thanks,
O.R.


<CLIP>

Building Flintlock Pistols with Mike Miller - 2 disks​


These two disks feature talented full time traditional gun builder Mike Miller from Paducah Kentucky. Mike is building a very fine flintlock Kentucky pistol starting with a premium curly maple stock blank & then fabricating most of the parts. The tapered & flared Bob Paris barrel is inlet with hand tools; the brass mounts including the ramrod pipes & muzzle cap, sights, tenon, trigger & side plate are all fabricated. Mike demonstrates a neat technique to swage out & inlet a brass butt cap. He also installs a touchline vent liner, relief carves the stock & adds a beautiful traditional finish over the nitric acid stain. Three-hour run time.
 

Attachments

  • IMG_4369.jpg
    IMG_4369.jpg
    129.5 KB
  • IMG_4371.jpg
    IMG_4371.jpg
    127.1 KB
  • IMG_4370.jpg
    IMG_4370.jpg
    134.3 KB
  • IMG_4372.jpg
    IMG_4372.jpg
    118.8 KB
  • IMG_4373.jpg
    IMG_4373.jpg
    114.4 KB
  • IMG_4374.jpg
    IMG_4374.jpg
    146.5 KB
  • IMG_4375.jpg
    IMG_4375.jpg
    154.4 KB
  • IMG_4376.jpg
    IMG_4376.jpg
    144.8 KB
  • IMG_4377.jpg
    IMG_4377.jpg
    158.9 KB
  • IMG_4378.jpg
    IMG_4378.jpg
    140.6 KB
Last edited:
Status
Not open for further replies.
Back
Top