Two sheaths, one knife

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Yeoman

36 Cal.
Joined
Dec 22, 2011
Messages
96
Reaction score
0
Hi all, thought I'd post a couple of pics of two sheaths I've made for a Hudson Bay Trade Knife I ordered from Track of the Wolf (by way of a quick review of the knife, it's really nicely made and takes a great edge with a little effort).

First the set together:
7899039814_bd871bd8fd.jpg


This is the Scandinavian style sheath I made, it's in veg tan leather and is the style I tend to prefer for bushcraft knives and so on. They are easy to make and pretty much correct and have been around for centuries. The main reason I like them is that they tend to keep the knife in a good, tight grip and the blade shouldn't cut through the stitching or outside of the scabbard which is handy if you like to keep the blade sharp!
7899042046_a80d3723c2.jpg


This was something of an experiment, I had a pair of black riding boots that had split across the heel and weren't repairable. The leather was pretty good though and I thought I'd try to make a sheath from some bits I'd salvaged. I wanted to make something that I could either put on a belt or put a thong through and use as a neck scabbard (though the knife is probably a little large for a neck knife). It worked fairly well and I like the simplicity of the stitching, I'm considering putting some sort of decoration on the central part and maybe a hole in the bottom trapezoid bit to loop the thong around when not in use. I'm not convinced this is historically correct for any period but hey, it was fun to do and looks rather nice I think. My only real criticism is that it isn't particularly tight and so when on a belt I'll probably have the scabbard on the inside to provide a little extra security.
7899046328_f2647b2f0c.jpg


Cheers folks.
 
My fear is, as neither of your sheaths appear to have a welt, the knife will cut through the stitching in short order.
 
Nice knife!...Yep, even the best of stitching on a knife sheath needs that extra protection of a welt. Especially, if you are intending the knife to be a worker and not just a looker!

I think most of the knifemakers here might agree!
 
You can't see in the pictures but on both sheaths there is a layer of leather sandwiched between the outer pieces between the blade and the stitching. This protects the stitching, provides a little extra stiffness and allows the scandi style scabbard to have a tight grip on the handle without being too tight around the blade. The blade is never in contact with the stitching.
 
Yeoman said:
You can't see in the pictures but on both sheaths there is a layer of leather sandwiched between the outer pieces between the blade and the stitching. This protects the stitching, provides a little extra stiffness and allows the scandi style scabbard to have a tight grip on the handle without being too tight around the blade. The blade is never in contact with the stitching.
Ah, so there is a welt...
A sheath without a welt is unsafe (in my opinion).
 
Yeah, I generally agree unless there is something else to protect the stitching. I had a rather shoddy sheath knife I pinched off my father as a youngster and it didn't have a welt of any kind, as a result I spent half my life stitching it up after the blade had started to cut through it. A major design flaw I don't intend to emulate!
 
Back
Top