This in a Navy Arms brass frame and I want to replace the nipples (cones) to use #11 caps. Anyone happen to know the thread and cone length?
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Uberti Leech & Rigdon .44 cal
- Thread starter treebone
- Start date
Help Support Muzzleloading Forum:
My recommendation is to take one of the nipples from @treebone's revolver to the local hardware store where he can find a thread tester to determine the thread to be certain of the pitch. Most likely the threads will be 6mm x0.75. My Uberti revolvers use the 6x0.75 nipples. Another consideration is the cone height. The cone height for a revolver is shorter than the cone height for a rifle.
Track of the Wolf has several nipples that should fit your revolver.
https://www.trackofthewolf.com/List/Item.aspx/159/2
Track of the Wolf has several nipples that should fit your revolver.
https://www.trackofthewolf.com/List/Item.aspx/159/2
Similar threads
- Locked
