I hope you paid by credit card. If so, tell the seller you are going to dispute the charge if they don't take it back or at least give a significant rebate for you to keep it.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Unboxing disappointment
- Thread starter Caleb Foster
- Start date
Help Support Muzzleloading Forum:
- Status
- Joined
- Jun 13, 2023
- Messages
- 178
- Reaction score
- 481
Thanks guys I sent some photos to the retailer. I will keep them in confidence for the time being. I believe I’ll ask for a partial refund because they are now out of stock, I think I got the last one. I’ve wanted one of these for a long time. I’m just bummed it’s all dinged up.
I got one of those guns a few months ago.
A few of my pin holes are not quite like the ones in the pics, but not perfect either. I remember thinking someone had had trouble getting them in. Not bad to the naked eye anyway.
And my ramrod was also loose. It would move a couple inches from recoil. I seem to remember putting a spot of super glue where it goes into the stock... but maybe this is the gun I bought a new rod for because the OEM rod was too flexible for my liking. Or both, lol. I don't recall which gun I bought the new rod for.
A few of my pin holes are not quite like the ones in the pics, but not perfect either. I remember thinking someone had had trouble getting them in. Not bad to the naked eye anyway.
And my ramrod was also loose. It would move a couple inches from recoil. I seem to remember putting a spot of super glue where it goes into the stock... but maybe this is the gun I bought a new rod for because the OEM rod was too flexible for my liking. Or both, lol. I don't recall which gun I bought the new rod for.
- Joined
- Jun 13, 2023
- Messages
- 178
- Reaction score
- 481
I am thinking about ordering a new rod from TOTW, I think it’s 9 mm size, they sell hickory rods
I have a feeling I know where you bought it. A partial refund will be difficult from them. A full refund and shipping it back is more likely.
Surfinator58
40 Cal
- Joined
- Sep 7, 2018
- Messages
- 228
- Reaction score
- 375
ita amazing how much stuff gets returned to stores and the item isnt even looked at, just tossed on a cart and put back in stock. rarely does a clerk even ask if there is anything wrong with it.
Caywoods gun in about 3 years. Looks like the pins have been removed before you received the gun. It looks like a used gun to me. Semper Fi
When I have a loose rod, I just tie a leather lace through one of the pipes. Semper Fi.
- Joined
- May 6, 2013
- Messages
- 4,278
- Reaction score
- 9,857
Thats s darn shame and a real disappointment to get a new gun like that . Its some easy fixes or cover ups to fix or actually to make it better but you certainly should not have to do such things . Sure sorry you had this happen to ya. I hope they will take it back and make everything right . Best of luck .
- Joined
- Jun 13, 2023
- Messages
- 178
- Reaction score
- 481
I’m just sick about the whole thing. This is the most I’ve ever spent on a gun. The bad thing is that I tried to gently tweak the ramrod to see if it would fit tighter and it snapped
I don’t know what to do now
Return it and get a replacement.
appalichian hunter
75 Cal.
- Joined
- Oct 28, 2018
- Messages
- 5,828
- Reaction score
- 9,476
Yep, that gun would be going back to where it came from.
- Joined
- May 6, 2013
- Messages
- 4,278
- Reaction score
- 9,857
D@mn .... I'm sorry bud. Thats BS that the ramrod snapped .I’m just sick about the whole thing. This is the most I’ve ever spent on a gun. The bad thing is that I tried to gently tweak the ramrod to see if it would fit tighter and it snapped
Any reputable dealer would work with you to help make the situation right.
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,659
- Reaction score
- 24,219
- Location
- Louisiana & My camp in Mississippi
No good excuse for what you received. I'd cancel payment if at all possible. That should get their attention.
If you or one of your friends are competent to do it, those stocks have enough wood to take them down far enough to get rid of the divots.
1st thing you do with any Pedersoli ram rod is break it in half over your knee and replace it with a good hickory one so no loss thereI’m just sick about the whole thing. This is the most I’ve ever spent on a gun. The bad thing is that I tried to gently tweak the ramrod to see if it would fit tighter and it snapped
As to the pin blowouts…..plenty of wood on the trade gun to slim it down while removing most if not all the “damage”
Give you a chance to slim up the whole stock and apply a more desirable finish anyways !
Then keep it and enjoy it
Good luck eitherway.
Already into it for $1300. You are not happy and therefore are spending your time on it. You may yet have more expenses. If you put a dollar value on your time you could be into this gun north of $2000 before you are satisfied. There are a couple of good guys on here that will build you a NICE rifle for $2000. That, and I have seen some good used guns for sale on this forum.
I will say too return it. Seems like the Dealers will not even allow that anymore. I hope you bought it on a CC ! My Pedersoli Scout has many issues i have been working on for a year. I am still working on it, will never get another one.
- Status
Similar threads
- Locked
