Reply to thread

I am a big fan of LMF Permalyn Sealer to seal maple stocks before I apply my oil-based finish (the thin Sealer product, NOT the thicker Finish).  I let the Permalyn Sealer soak into the wood, then sand it off the surface, then apply my finish, basically following LMF's directions.  I am considering to use the LMF Sealer as a grain filler for a walnut stock by sanding as I apply the Sealer.  Once dry, I would sand off any surface slurry then apply my finish as per usual. Before I give this a go, thought I'd see if anyone else out there has done this and had good results.