• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Watch this space

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jan 24, 2005
Messages
3,235
Reaction score
6,550
Location
New England, New South Wales, Australia.
Coming shortly,
I pay for it on Thursday the 6th and should have it by the middle of next week.
1851 Austrian pistol with tube lock.
1035888F-AE9B-4679-951C-79E564CBC61F.jpeg
19BCD911-940D-45F7-8BA8-E77C235FA799.jpeg
DD68E5B6-053F-417D-A60E-2255BF75F1D5.jpeg

Vendor’s photos.
 
A little different than a Lancaster I saw, years ago.
Cool, short, period of arm’s development.
Congrats
 
Interesting ignition system, suggestion on priming compound in the construction of the tube - The old white tipped barn burner matches if you can find them, when young and not so shall we say smart, we would take these matches and use a pocketknife (old Barlow) scrape carefully off the match heads on to a sheet of paper, take the scrapings put in a 22 cal. long empty rifle case. crimp the case shut with a pair of pliers, lay it on an anvil and whack it with a hammer. big bang. And if dark big flash. Might be better than gathering the compound in the top hat caps.
 
Unfortunately such matches were banned here years ago, the local versions were known as ‘wax matches’ because the stem was heavily waxed with white wax.
Story goes that fires were started because rodents gnawed the heads and one bloke, at least, had the container go off in his pocket when he fell over.
They would have been ideal for priming.
 
Interesting ignition system, suggestion on priming compound in the construction of the tube - The old white tipped barn burner matches if you can find them, when young and not so shall we say smart, we would take these matches and use a pocketknife (old Barlow) scrape carefully off the match heads on to a sheet of paper, take the scrapings put in a 22 cal. long empty rifle case. crimp the case shut with a pair of pliers, lay it on an anvil and whack it with a hammer. big bang. And if dark big flash. Might be better than gathering the compound in the top hat caps.
Those matches mysteriously disappeared years ago. I bought a number of boxes when I realized they were scarce but have no idea where they are.
 

Latest posts

Back
Top