Here’s one to catch your eye and dress your game. It’s my WE-1 Roach Belly skinning and hunting knife. Price is $125.00 +$15.00 s&h USD$
A few months back; Walkingeagle and I talked about the Roach Belly design of mine. He loved the design but liked the idea of a slightly bigger, meatier, handle. So after going back and forth for a while, I redesigned the handle closer to what Walkingeagle wanted. I made one and he bought it immediately. He LOVES this updated version, so I’ve called this one the WE-1 (Walkingeagle-1) model Roach Belly after Walkingeagle.
Just the handle of this knife alone WILL get you noticed at your next club shoot, Rendezvous, Mountain Man encampment, or hunting trip… guaranteed!
The knife is 9.25” overall length. The blade is 5” long by 1.25” at the widest part of the curve, and .093” (3/32”) thick 1095 high carbon steel. It’s shaving sharp! The blade design makes it an excellent skinner and the Roach Belly shape is ideal for field dressing game, from the smallest Wood Chuck to the biggest animal! It has proven itself while by dressing 2 Elk, a Bear, a Moose and a Mule deer buck. It dressed all five of those big game animals with virtually no need to sharpen, just a quick touch up with a field dressing stick.
The eye catching handle is Tiger Striped Curly Maple. I brought out the grain so it really pops! Then I oil sealed, buffed, and waxed it for further protection. The handle is held on by (2) 1/8” iron pins and Non visible epoxy for added waterproofing at the joints. I know Epoxy isn’t PC, but it keeps the handle slabs securely attached along with the 2 pins. It also stops any water from attacking, cracking, and swelling the wood at the joint between the slabs and the steel tang, and it seals the joint between the handle slabs and tang to keep out blood, dirt, and other unhealthy bacteria.
The sheath is made of 5oz. Veg. tanned cowhide. It has a welt to protect the stitches, and is stitched in an X pattern for that PC/HA appearance. There is a second row of stitching to add to the strength. This sheath is stained Black. It has a “Mountain Man” style belt slot that will accept a 3” wide belt. To further strengthen the belt slot, I’ve added 2 Black steel rivets, one above, and one below the slot.
The rear of the sheath has my Two Feathers signature burned into it.
Price disclaimer: All prices are in USD$. I prefer PayPal friends and family, but will take money orders and personal checks.
I ship same day as funds are received or checks clear. The exceptions are Federal Holidays, Sundays, severe weather and PO hours. I will email you or PM you with tracking information the minute I return from the PO.
I have had 100% satisfaction on my knives/items. You can trust that any purchase you make from me will live up to, or exceed your expectations!
I now sell in Canada. (See price disclaimer.)
You can PM me here, or email me at [email protected]
As always, thanks for looking.
God bless:
Two Feathers
A few months back; Walkingeagle and I talked about the Roach Belly design of mine. He loved the design but liked the idea of a slightly bigger, meatier, handle. So after going back and forth for a while, I redesigned the handle closer to what Walkingeagle wanted. I made one and he bought it immediately. He LOVES this updated version, so I’ve called this one the WE-1 (Walkingeagle-1) model Roach Belly after Walkingeagle.
Just the handle of this knife alone WILL get you noticed at your next club shoot, Rendezvous, Mountain Man encampment, or hunting trip… guaranteed!
The knife is 9.25” overall length. The blade is 5” long by 1.25” at the widest part of the curve, and .093” (3/32”) thick 1095 high carbon steel. It’s shaving sharp! The blade design makes it an excellent skinner and the Roach Belly shape is ideal for field dressing game, from the smallest Wood Chuck to the biggest animal! It has proven itself while by dressing 2 Elk, a Bear, a Moose and a Mule deer buck. It dressed all five of those big game animals with virtually no need to sharpen, just a quick touch up with a field dressing stick.
The eye catching handle is Tiger Striped Curly Maple. I brought out the grain so it really pops! Then I oil sealed, buffed, and waxed it for further protection. The handle is held on by (2) 1/8” iron pins and Non visible epoxy for added waterproofing at the joints. I know Epoxy isn’t PC, but it keeps the handle slabs securely attached along with the 2 pins. It also stops any water from attacking, cracking, and swelling the wood at the joint between the slabs and the steel tang, and it seals the joint between the handle slabs and tang to keep out blood, dirt, and other unhealthy bacteria.
The sheath is made of 5oz. Veg. tanned cowhide. It has a welt to protect the stitches, and is stitched in an X pattern for that PC/HA appearance. There is a second row of stitching to add to the strength. This sheath is stained Black. It has a “Mountain Man” style belt slot that will accept a 3” wide belt. To further strengthen the belt slot, I’ve added 2 Black steel rivets, one above, and one below the slot.
The rear of the sheath has my Two Feathers signature burned into it.
Price disclaimer: All prices are in USD$. I prefer PayPal friends and family, but will take money orders and personal checks.
I ship same day as funds are received or checks clear. The exceptions are Federal Holidays, Sundays, severe weather and PO hours. I will email you or PM you with tracking information the minute I return from the PO.
I have had 100% satisfaction on my knives/items. You can trust that any purchase you make from me will live up to, or exceed your expectations!
I now sell in Canada. (See price disclaimer.)
You can PM me here, or email me at [email protected]
As always, thanks for looking.
God bless:
Two Feathers
Thanks.
