TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,658
- Reaction score
- 24,218
- Location
- Louisiana & My camp in Mississippi
What a great surprise!!!
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
- Joined
- Oct 31, 2019
- Messages
- 161
- Reaction score
- 151
wow - very nice!
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,658
- Reaction score
- 24,218
- Location
- Louisiana & My camp in Mississippi
Taking a short shop break. Assembled the new carved Woodsrunner. Was nothing I could do to improve the fit! It was perfect. Put the screws in the nose cap and filed the tips smooth. Filed the double entry grooves on the butt plate to match the stock lines and started cleaning up all the casting flash. Finished the butt plate with a good polish. Started on the trigger guard, takes a while to get the seam line out. I hate seam lines. Took a couple of photos of the clean up and did a quick polish on the portion of the guard that was done for comparison.
Attachments
appalichian hunter
75 Cal.
- Joined
- Oct 28, 2018
- Messages
- 5,828
- Reaction score
- 9,476
Good job waiting to see this rifle finished.
Went to Kempton today. Sat in on some seminars, did some shopping( bought a rice barrel) and nosed around. I can’t decide if I want to go back tomorrow. Got everything on my shopping list but there are some more seminars I’d like to see. 150 mile round trip
Wifey and I got up before the chickens and made the 2 hour drive to the Muzzle Loader fair in Kempton, mainly to beat the heat and we did. Great show and great people.
Then did the required stop at Dixons, I just can't be in that area and not stop. When checking out at Dixons the young lady asked if she could see my ID ! That threw me for a moment, I thought she's carding me, do you need to be over 70 to buy muzzleloading stuff in PA now !! Hey you never know its Pennsylvania and yea I'm old.
She was doing her due diligence and checking ID against credit cards. Smart folks in this day and age.
Thanks,
O.R.
Then did the required stop at Dixons, I just can't be in that area and not stop. When checking out at Dixons the young lady asked if she could see my ID ! That threw me for a moment, I thought she's carding me, do you need to be over 70 to buy muzzleloading stuff in PA now !! Hey you never know its Pennsylvania and yea I'm old.
She was doing her due diligence and checking ID against credit cards. Smart folks in this day and age.
Thanks,
O.R.
Took of work and went to Kemptons gunmakers faire, Didn't come home with a gun unfortunately. The hunt for my turkey fowler continues...
I did the same thing, went to dixon's after the fair. Must of had the same lady at checkout, she checked mine too, and here I thought she may have took a liking to me and was seeing where I lived... Oh well, that dream is shattered. LOL
Pulled the trigger, so to speak, on 1750 more caps between 2 different vendors.
- Joined
- Mar 13, 2020
- Messages
- 7,478
- Reaction score
- 20,980
- Location
- On the Border in Idaho looking at BC
Dale, i had the same thing happen the other day, except it turned out to be a Walker Colt someone dropped off to be fixed. try as i might i couldn't remember it happening. called the guy that dropped it off 2 years ago and found out he has been dead for a year. I absolutely hate these golden yearsI B Dumb. Sitting at my desk, I noticed a box, that I did not recognize, under an end table . Got it out; realized it was a Reb Navy Arms 1860 revolver. I had completely forgotten I bought it. Losing my mind? Took it out, waxed it nicely, and it is near perfect. Looks great, functions as it should, and I am happy to have a gun I did not know I have. Getting old is not all moonlight and roses.Dale
the widow tried to pay me for the work done, i refused, and she told me to keep the gun. now i guess i will have to learn to shoot the thing.
- Joined
- Mar 13, 2020
- Messages
- 7,478
- Reaction score
- 20,980
- Location
- On the Border in Idaho looking at BC
the other day i was on here flapping my gums about trying anything at least once.
have been thinking of shooting conical out of my TC Hawken .45 flintlock just for S&G's.
All I could find in my mess in .45 cal was some hard cast 255g cast for my Long Colt.
why not? try anything once right? so i sat and lubed the things with bear grease/bees wax.
tested them for hardness and they came out at 16bnh.
punched out some felt over powder wads and lubed them with the same as above.
50g swiss fffg and swiss ffffg in the pan.
sights are TC vernier and globe front with circle insert.
first was with hard cast at 50 yards off bench.
second was after i cast some of same bullets that measured 9bhn. the 9's were easier to load but the 16's weren't bad once down the rifling with a short starter.
i think the deer are in trouble this fall!
have been thinking of shooting conical out of my TC Hawken .45 flintlock just for S&G's.
All I could find in my mess in .45 cal was some hard cast 255g cast for my Long Colt.
why not? try anything once right? so i sat and lubed the things with bear grease/bees wax.
tested them for hardness and they came out at 16bnh.
punched out some felt over powder wads and lubed them with the same as above.
50g swiss fffg and swiss ffffg in the pan.
sights are TC vernier and globe front with circle insert.
first was with hard cast at 50 yards off bench.
second was after i cast some of same bullets that measured 9bhn. the 9's were easier to load but the 16's weren't bad once down the rifling with a short starter.
i think the deer are in trouble this fall!
Attachments
longcruise
70 Cal.
Been down that same road with a tc capper and that identical bullet. Got the same results. It was just a whim though. It would be legal here for anything except elk or moose. Thought it would interesting for antelope but I don't expect to get a tag for one in quite a while.
Went to the Friday edition of the Kempton , Pa. Muzzleloading fair. Temp in he 90's , but some uildings were air conditioned. A good time was had by all. Saw old friends , and picked up a few goodies.
@PathfinderNC and myself along with "Teddy" went to Camp Raven Knob for the closing campfire. We dressed somewhat historic and even made a prestigious award to the Program Director by inducting him into the Ancient and Noble Order of the Blind Squirrel
I went out to the range and was very proud of my guns performance....not so much my shooting. The 1851 Navy has been a work in progress recently. Installed an action shield, new hammer and bolt, increased tension on the mainspring and replaced TOTW nipples with slixsprings. The gun went through 4 cylinders without a hiccup. Almost like shooting an unmentionable. I'm not much of a match shooter....I just look at the target and say, "yep, that guy is dead". Good enough. With the Hawken I was comparing using a damp ballistol patch vs Old Turkey Track. Both are good and at 50 yards I can't see any better than the shots indicate. 18 shots without swabbing between shots by loading the ball with a jag and a following patch. I let a fellow shooter at the range shoot my gun. He did good. First time shooting a ML. And distracted me enough to dryball the rifle. Easily taken care of by dropping a few grains of powder through the nipple hole and shooting it out. A good day.
- Joined
- Aug 31, 2012
- Messages
- 203
- Reaction score
- 184
Went to the Gun Makers Fair in Kempton PA on Friday. Was there early. Really nice to listen to the passion from the people. Sad not a lot of young people so you wonder if learning and living history will be passed on. Watch yer top not!
