What Muzzleloading Stuff Did You Do Today?

[deerstalkert]

fun! how is the geometry of the hammer and nipple? any chance of squaring the breech inlet and moving the thing (you know, "the thing") back?
may be enough play in the wedge lug. then the under rib will bump, so would need inlet or trimmed.

alternative is square up the inlet and glue in a filler. use matching wood and it could disappear. or a contrast wood.
or leave it and let it fill with fouling!

 

[Tim_IA]

fun! how is the geometry of the hammer and nipple? any chance of squaring the breech inlet and moving the thing (you know, "the thing") back?
may be enough play in the wedge lug. then the under rib will bump, so would need inlet or trimmed.

alternative is square up the inlet and glue in a filler. use matching wood and it could disappear. or a contrast wood.
or leave it and let it fill with fouling!

I was thinking of replacing the brass toe plate with bone, so may square it up and use a bone shim for kind of a interesting addition to the old gun...

 

[SciAggie]

i have finally given up wrangling. or the bulls have decided it for me. can't wrestle this guy anymore, and sure can't run from him!
he is the calmest bull in the herd, sometimes scares me realizing their capabilities.View attachment 271940

I grew up in a ranching family and made my living ranching for over 20 years. I was always amazed at the raw strength of a full grown bull.

 

[deerstalkert]

it does present you with all kinds of opportunity to make it your own. a punched out silver dollar would be about the same as a squared up space. bone, ebony, silver, all would loo great.
bone or antler would probably stain a bit with use but that might be the best eventual look.
now you have me considering something along those lines on this build i am doing.

 

[SciAggie]

As to what I did ML today - I sharpened some knives.

 

[deerstalkert]

I grew up in a ranching family and made my living ranching for over 20 years. I was always amazed at the raw strength of a full grown bull.

many times calm as a pup. but Katey bar the door if they want to be some place other than you want them to be.
pizzed that guy off once and he shoved a 4 cow trailer over the bank. with the truck attached.
he was a three year old in that picture, hadn't gotten his strength and size yet!
followed him once when he came down the mountain. he had been ganged up on by two other bulls. every fir, cedar, or tamarack sapling he came to he uprooted. kept my distance.

 

[wiscoaster]

More work on Trapper pistol build:
https://www.muzzleloadingforum.com/threads/my-traditions-trapper-pistol-kit-build-log.171998/

 

[Deavertex]

Meant to post this yesterday, but I sent off the payment for my Euroarms Remington New Model Army. My wife informed me that was my Christmas present, but that's much better than what I thought she was going to say.

 

[PathfinderNC]

Amidst all the stuff I had to do today, I managed to get back to work for a couple of hours on a flat horn.
I need a long, quiet day soon!

 

[SciAggie]

many times calm as a pup. but Katey bar the door if they want to be some place other than you want them to be.
pizzed that guy off once and he shoved a 4 cow trailer over the bank. with the truck attached.
he was a three year old in that picture, hadn't gotten his strength and size yet!
followed him once when he came down the mountain. he had been ganged up on by two other bulls. every fir, cedar, or tamarack sapling he came to he uprooted. kept my distance.

I have no difficulty believing this. Back in the days of grass ropes and wood plank fences we found a bull of ours that had an abscess on his jaw. He was a Hereford bull as you say, “calm as a pup”. We ran him up the chute and butted his head against a post - made a few wraps around his horns with the grass rope. He was in a chute and the sides were made of 2”x6” lumber.
Let me tell you - when dad lanced that abscess- it must’ve hurt like hades. That bull bellowed… He hooked a horn under the bottom plank of that chute and ripped through those boards like they were made of balsa wood. Then he shook his head and snapped those wraps of grass rope.
Well - without ropes and planks - dad and I found ourselves in the same enclosure with an angry bull. I’ll never forget how fast dad moved that day, lol. I’ll also never forget how what a display of strength that bull gave us.
So yep - those ol’ boys are impressive when ticked off.

 

[22ceejay]

Went to "Sportsmen With A Cause" annual Foster Child and Disabled Deer Hunt. I set up and the kids shot a couple of my Flinter"s at some novelty type targets. They seem to have enjoyed it. First time for some of them to ever shoot any kind or rifle.

 

[Stykbow]

Went hunting again this evening. For some odd reason I decided that I needed to know what was on the side of this ridge that was steep as a cows face. I stood there, half way up, thinking I was the only one stupid enough to attempt that climb. That’s when I spotted the spiffy headlamp laying on the ground! Guess I’m not the only ***** that climbed that ridge.

 

[B P Maniac Shooter]

Gun fell over 2nd time this year...
Yep...need another one. Arrrrgh..!!
Just ordered....hopefully it will get here by the end of next week...

 

[longcruise]

Got to love the precision inletting on these kit guns from the 70s!
View attachment 272021

CVA Frontier??

 

[Tim_IA]

CVA Frontier??

45 "Kentucky"

 

[Banjoman]

Went hunting again this evening. For some odd reason I decided that I needed to know what was on the side of this ridge that was steep as a cows face. I stood there, half way up, thinking I was the only one stupid enough to attempt that climb. That’s when I spotted the spiffy headlamp laying on the ground! Guess I’m not the only ***** that climbed that ridge.

I used to climb those steep ridges. Then I figured out that on the other side of every one was another steep side.

 

[Dusty_Traveler]

Put a few cylinders through the .36 1851 London Navy. First time I've shot it. I DIG it!

 

[longcruise]

45 "Kentucky"

Interesting. I just finished a very old cva 45 Kentucky and it was a very good fit throughout. However, I have another old cva frontier kit in the wings with a gap there of about 1/8". This discussion has gotten me thinking of some interesting ways to fill it.

 

[WALT53]

Almost 40 bucks total from Powder, Inc.

Your from the Edmonton area aren’t you and powder inc is USA if so how does that work .

 

[deerstalkert]

started the dreaded butt plate inlet on the cherry build. fire blued the rest of the screws.