idonthaveamusketyet:|
.50 caliber
if it has anything to do with size of the gun, at what size does swabbing become necessary?
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Why is it necessary to swab the bore with a cannon but not a musket?
- Thread starter idonthaveamusketyet:|
- Start date
Help Support Muzzleloading Forum:
- Joined
- Mar 13, 2020
- Messages
- 7,478
- Reaction score
- 20,980
- Location
- On the Border in Idaho looking at BC
swabbing cools any embers from last shot. wouldn't want to chunk a charge of cannon size onto a hot coal. though someone sometime and somewhere discovered this the hard way!
many use different techniques to cool any embers in muskets. stand by for a lengthy discussion!
many use different techniques to cool any embers in muskets. stand by for a lengthy discussion!
So artillery was normally loaded with bags or a bag of powder, or envelopes, and then the projectile. It's the bag or
the envelope leaving bits and pieces of smoldering embers that you don't get from a musket that is the problem. Not the length of the barrel.
Normally a single bag of premeasured powder was loaded, then the projectile, then the order was to "prick and prime", which opened the bag and powder was poured down the touch hole to the bag itself, which allowed the linstock with it's burning fuse to ignite the whole thing. After firing the remnants of the bag were "wormed" out, then the piece was "sponged" in case the worm missed anything.
You tear open a musket cartridge then dump down loose powder, followed by the ball and the empty cartridge. None of the musket cartridge is against the breech face so there is no need to worm and then to sponge the musket.
That's all there is to it.
OH with sufficiently rapid fire, a musket will cook off... but normally that's with blanks, not live rounds.
LD
the envelope leaving bits and pieces of smoldering embers that you don't get from a musket that is the problem. Not the length of the barrel.
Normally a single bag of premeasured powder was loaded, then the projectile, then the order was to "prick and prime", which opened the bag and powder was poured down the touch hole to the bag itself, which allowed the linstock with it's burning fuse to ignite the whole thing. After firing the remnants of the bag were "wormed" out, then the piece was "sponged" in case the worm missed anything.
You tear open a musket cartridge then dump down loose powder, followed by the ball and the empty cartridge. None of the musket cartridge is against the breech face so there is no need to worm and then to sponge the musket.
That's all there is to it.
OH with sufficiently rapid fire, a musket will cook off... but normally that's with blanks, not live rounds.
LD
- Joined
- Mar 13, 2020
- Messages
- 7,478
- Reaction score
- 20,980
- Location
- On the Border in Idaho looking at BC
there you have it.
Woody Morgan
62 Cal.
- Joined
- Mar 20, 2019
- Messages
- 56
- Reaction score
- 81
Certainly does not hurt, maybe even a good idea, to swab the bore of a muzzle loading shoulder weapon or hand gun - have you ever seen a blowback/flashback while someone was pouring powder down a musket barrel?
With regard to swabbing the bore of a cannon - I have a friend in Oklahoma who is missing most of his hand because the crew was in a hurry. He and several other artilleriests across the nation can share stories about "not swabbing the bore."
With regard to swabbing the bore of a cannon - I have a friend in Oklahoma who is missing most of his hand because the crew was in a hurry. He and several other artilleriests across the nation can share stories about "not swabbing the bore."
Well, maybe ONLY once...
we all remember CAPT. HOOK, and the accident at a collage in VT. his name is DAVID DESOTTI, I believe? he lost his hand. and he still reenacts. that is why it is done. and a musket it is unlikely & firing with a wet swabbed barrel.
There is also a proper technique as to stance and ram handling I believe. I cringe when I see folks sending patched balls home using the palm of the hand to push the rod.
Last edited:
- Joined
- Sep 2, 2021
- Messages
- 280
- Reaction score
- 443
Perhaps on our cannon events we demand sponging the barrels because of the large amount of spectators watching. Actually in a cannon there’s no exposed powder until after the prick. And yet after a rifle or pistol shot we pour loose powder down the barrels without ever swabing in a far faster sequence. My thoughts.
Doc,
Doc,
- Joined
- Jan 9, 2008
- Messages
- 1,939
- Reaction score
- 2,187
I have experienced a "cook-off" with a musket during live fire. And I witnessed another fellow have a "cook-off" during live fire.
Further to Loyal Dave's post Most hand injuries were cause by wrong hold on the loading rod if a cannon pre-fired.The Orders from the Gunner were THUMBS UP, Away from the Muzzle.The hand is blown Open NOT Closed More than likley were the"Guesture" comes from. O.D.
- Joined
- Sep 2, 2021
- Messages
- 280
- Reaction score
- 443
Interesting in the hundreds of thousands of rounds shot with a patched round ball at Fort Shoots and Silhouette competitions. Basically shooting as fast as we can shoot accurately. Have never even heard of a so called “cook-off”. Thinking perhaps this happens because of a piece of paper left smoldering ? Which wouldn’t happen with a patched round ball.
Doc,
- Joined
- Jan 9, 2008
- Messages
- 1,939
- Reaction score
- 2,187
I saw a cook-off happen at a regional shoot. One of the S&S crew was in the middle of a timed event. It burned his hand but he continued to load and shoot until the stage was over.
Mine was with a greased minie and a measured powder charge.
Mine was with a greased minie and a measured powder charge.
You answered your own question. ☺
Patched round ball is different than loosely fitting paper cartridges in a musket speed drill.
No the paper does not remain, but the build up of ash will hold an ember... something like a patch being rammed down scrubs the barrel walls a bit. Not completely..., for as you know after enough patched rounds the barrel must be swabbed..., while with military ammo a musket was expected to fire as many as 24 rounds without any swabbing.
LD
- Joined
- Sep 2, 2021
- Messages
- 280
- Reaction score
- 443
I shoot in a relatively low humidity area so shooting a 30 round trail followed by a Fort Shoot of 25/30 no need to swab a barrel except to clean if I would desire to. That’s a great advantage in low humidity. But thank you for the info on musket loading.
Doc,
We're the opposite. There are summer days here that the humidity exceeds 100% due to "super saturation" from high temps.
Another example..., out West my brother in Albuquerque has a swamp cooler to cool his home. They cannot be used out here as the evaporation rate is very very low due to very high humidity. I measured my AC discharge one weekend last summer..., the condensed water was almost a quart per 12 hour period.
LD
Snake Pleskin
54 Cal.
I moved from Scottsdale, AZ with high temps and 10% humidity! To Aiken, SC with high temps and 95% humidity!. Go figure! In AZ the sweat would dry instantly on your skin leaving white marks from the salt. In SC you just have to get used to being wet, because you can change a completely soaked T shirt every 15 min if doing anything outside! Can't imagine the humidity in parts of Fla. LA or Miss?
I can be added to that list as of 11 months ago. I missed some remnants then wet swabbed before loading powder packet. It tore as using rammer to push in and ignited launching rammer out and breaking my thumb in 15 places. I'm lucky, I still have a usable thumb reduced to 1/3 of previous flexibility.
