• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD WTS: .45 caliber percussion long rifle

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 29, 2014
Messages
200
Reaction score
125
Full stock long rifle, made in the 60's with a 42" straight octagonal barrel, 15/16" across the flats. .45 caliber, good bore. Double set triggers (the set trigger must activated for the lock to ****). Very nice, light front trigger. I shot this on one occasion and it did well. I never had time to play around with different loads. Has plate with original owners initials and the year 1966 marked. Barrel is marked by W. C. Hart of Cross Timbers, MO.

$675 plus shipping.
 

Attachments

  • 43FA8B80-02A9-46F5-B512-CEEEFAA236D5.jpeg
    43FA8B80-02A9-46F5-B512-CEEEFAA236D5.jpeg
    175.5 KB
  • 33EBC02F-977D-4439-9D5C-13AEB0E0369E.jpeg
    33EBC02F-977D-4439-9D5C-13AEB0E0369E.jpeg
    219.2 KB
  • CA01D6F3-CD45-49D4-A816-1FC8ABC36F93.jpeg
    CA01D6F3-CD45-49D4-A816-1FC8ABC36F93.jpeg
    330.7 KB
  • 14014E80-CDDF-4064-B0DA-54ED5D63E0B5.jpeg
    14014E80-CDDF-4064-B0DA-54ED5D63E0B5.jpeg
    134.3 KB
  • 673DC65E-01EE-4CA4-8B7B-6CD8BA4DF847.jpeg
    673DC65E-01EE-4CA4-8B7B-6CD8BA4DF847.jpeg
    35.3 KB
Last edited:
I forgot to mention... there is a crack at the lock screw head on the edge of the left panel. It's because the original builder did not use a bushing to distribute the force of the bolt head (and it's a fairly narrow bit of wood). I can epoxy it and insert a pin through it.

I also installed a brand new drum and nipple. The originals were serviceable but likely original from the 60s and have a lot of wear. I will include the original drum and nipple.

I can revise the price to $575 plus shipping. I'm funding another item (another .45, but flintlock). Postal MO please. PayPal friend option works, too.
 
Is that a Russ ham lock?
No, I don't think so. I don't think it's marked at all. It's the first brass lockplate I've seen in person, though I recall reading about them. There is no half-**** in the action. I have a Russ Hamm on my other .45. The lock on this seems to have more power when striking than the Hamm lock (though the Hamm lock has never failed to set a cap off, either). Interestingly, there is no half-****.
 
Status
Not open for further replies.
Back
Top