• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

You guys may know what this is.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 31, 2022
Messages
97
Reaction score
311
Location
Dallas
I admit I don’t that much about black powder guns. Every thing I shoot is made in Italy for now. I met a guy at my club that showed me a head scratcher.
He talked to me like I was well versed in the subject. I just went along and said nice, came away thinking there is a lot to know about black powder guns.
 

Attachments

  • what is it.jpg
    what is it.jpg
    335.2 KB
…..In continental Europe, the use of smooth-bored pistols was considered cowardly, and rifled pistols were the norm.[13] The short range most duels took place at, combined with the accuracy of rifled pistols meant their use substantially increased the chances of a fatality during a duel.[13] A pair of rifled pistols often included a small hammer or mallet as an accessory; they used slightly oversized bullets and a hammer was needed to drive the bullet down the barrel when loading.

Pauly, Roger (1 January 2004). Firearms: The Life Story of a Technology. Greenwood Publishing Group. p. 69. ISBN 978-0-313-32796-4.
 
…..In continental Europe, the use of smooth-bored pistols was considered cowardly, and rifled pistols were the norm.[13] The short range most duels took place at, combined with the accuracy of rifled pistols meant their use substantially increased the chances of a fatality during a duel.[13] A pair of rifled pistols often included a small hammer or mallet as an accessory; they used slightly oversized bullets and a hammer was needed to drive the bullet down the barrel when loading.

Pauly, Roger (1 January 2004). Firearms: The Life Story of a Technology. Greenwood Publishing Group. p. 69. ISBN 978-0-313-32796-4.
Opposite of what I have read in the past. Thanks for the reference.
 
Not a harmonica gun. I can’t remember the technical name, but you push the block over and a charge of powder and a ball is seated. Not very safe.
 
I have always wondered why sets of pistols nearly always get refered to as dueling pistols? As to dueling pistols I seriously doubt rifling was ever considered a plus during the age of dueling as a smooth bore gives up nothing to a rifled bore at the distances duels were fought. I have owned and shot multiple sets of smooth bore duelers and with a little practice it is not hard to keep all shots on a playing card out to 15yds.
 
It's a Girandoni repeater. The tube on the right side of the barrel is the magazine. The rectangular bar at the breech is pushed to the right while the muzzle is elevated, allowing a ball into it. When released it brings the ball back in line with the bore.

I can't tell from the pic if it's a firearm or an airgun. If the latter, the butt serves as the air resevoir.
 
Well excuse the F out of me for mentioning dueling pistols….at first glance, that’s what came to mind. Then the convo went that way regarding rifling….which many dueling pistols did have…. Anyhow, they have now been identified as to what they actually are.
 

Latest posts

Back
Top