-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
.62 Rifle Build, 2nd Try
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
I think I am about done. I will remove some more wood from the forestock but that’s about all, then begin with the staining and varnishing.
I’m a bit exhausted with this project but glad I took it on. I have learned a lot with it, and hopefully this .62 rifle will be a nice shooter.
I’m a bit exhausted with this project but glad I took it on. I have learned a lot with it, and hopefully this .62 rifle will be a nice shooter.
Attachments
Brokennock
Cannon
Man I want to shoot that!
Glad you persevered and saw this through.
Glad you persevered and saw this through.
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,639
- Reaction score
- 24,132
- Location
- Louisiana & My camp in Mississippi
Your side plate has really grown on me.
Brokennock
Cannon
Man,,,, I really, really want to shoot that gun.
Superb job, great results from a rough start.
Superb job, great results from a rough start.
- Joined
- Nov 12, 2018
- Messages
- 263
- Reaction score
- 868
Excellent job! Looking to reading about the range time with it ,
Thanks guys. Taking on this project became a challenge from the beginning. But I figured that learning isn’t always easy and it’s definitely not. But there are some here ( you know who you are) who patiently supported and educated me along the way. Thank you.
I honestly don’t know what I need with this carbine except for the novelty of it. The parts were a gift to me from a fellow Dulcimer builder (a Master luthier actually) and as such it will be a reminder to me of Ken’s wonderful spirit and friendship. It might even be great on a woods walk (might be a cheating edge with that large ball!).
Anyway thanks for looking and for your kind words
I will definitely update this thread with some info on how it performs.
I honestly don’t know what I need with this carbine except for the novelty of it. The parts were a gift to me from a fellow Dulcimer builder (a Master luthier actually) and as such it will be a reminder to me of Ken’s wonderful spirit and friendship. It might even be great on a woods walk (might be a cheating edge with that large ball!).
Anyway thanks for looking and for your kind words
I will definitely update this thread with some info on how it performs.
I was doing some trial shooting with the carbine this afternoon. I had some .595 round ball handy (I have to cast some .61’s). Started with 60 grains 3f and then for my last several shots went to 70 grains. Shot off the bench at 25 yards. I think it’s in the neighborhood where I can work with it!
Then just for fun took a pot shot at 50 yards. Man I like this gun!
Then just for fun took a pot shot at 50 yards. Man I like this gun!
Attachments
Last edited:
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,639
- Reaction score
- 24,132
- Location
- Louisiana & My camp in Mississippi
Very nice shooting, especially for the first time out with it. You did good.
Brokennock
Cannon
Looks good, shoots good. Lots of potential there.
- Joined
- Nov 12, 2018
- Messages
- 263
- Reaction score
- 868
Nice shooting. You built a good one ,
I think with the proper sized ball (.610) and more powder it will do well. Working my way up to it.
Thank you!Nice shooting. You built a good one ,
Brokennock
Cannon
I have a .610 mold, I'd have sent you some ball to try.
Just curious, why the jump from .595 to .610 skipping over .600?
Hi Brokennock- I have lots of the .595's that I use in my Fusil de Chasse so I tried them out just for heck. They loaded with simple thumb pressure and I was surprised at how well they shot.
I am 'jumping' to a .610 because that's the mold I have and I cast 30 balls with it. A .600 or .605 would be nice to try if the .610's don't preform well.
I have been sighting in and load developing my new .62 rifled “British Carbine” at home, and I am so surprised at how well I can shoot with it. Below is my target- 3 of 4 rounds in the 10x.
It has an Ed Rayl barrel with round-bottom rifling with a 1/72" twist.
I use 80 grains of Scheutzen 2F powder and a .610 cast round ball with spit-patch of .018 pillow ticking.
I have it sighted in for 5O yards (I can actually hit the 10X at that distance with this gun!).
Yesterday I went to a range with my buddies, and wanted to see how it did at the 100 yard mark.
Sure enough, without changing my sight picture or load, I had shot consistently in the black, with several shots in or touching thr 10 ring! There is no drop from 50 to 100 yards!
On a whim I decided to try a shot at the 200 yard target, a man-size metal torso and head metal gong. I aimed about 6 inches above the fellow ( resting my rifle across a box). My gun fired but I heard no hit. At first. About three seconds later I hear the thud as the ball smacked that steel!
I repeated this twice more with the same results. When I saw the target, I could see the three splatter marks in the lower third of the torso. I guess the ball dropped about 24 inches or so at 200 yards.
I was so surprised at what I was able to do with the rifle and have determined that this gun with its Ed Rayl barrel is the best muzzleloading rifle I have ever shot.
It has an Ed Rayl barrel with round-bottom rifling with a 1/72" twist.
I use 80 grains of Scheutzen 2F powder and a .610 cast round ball with spit-patch of .018 pillow ticking.
I have it sighted in for 5O yards (I can actually hit the 10X at that distance with this gun!).
Yesterday I went to a range with my buddies, and wanted to see how it did at the 100 yard mark.
Sure enough, without changing my sight picture or load, I had shot consistently in the black, with several shots in or touching thr 10 ring! There is no drop from 50 to 100 yards!
On a whim I decided to try a shot at the 200 yard target, a man-size metal torso and head metal gong. I aimed about 6 inches above the fellow ( resting my rifle across a box). My gun fired but I heard no hit. At first. About three seconds later I hear the thud as the ball smacked that steel!
I repeated this twice more with the same results. When I saw the target, I could see the three splatter marks in the lower third of the torso. I guess the ball dropped about 24 inches or so at 200 yards.
I was so surprised at what I was able to do with the rifle and have determined that this gun with its Ed Rayl barrel is the best muzzleloading rifle I have ever shot.
Attachments
Last edited:
Good shooting, Bob!
That rifle sounds like a keeper.
Notchy Bob
That rifle sounds like a keeper.
Notchy Bob
Similar threads
