Custom cut barrel channels and stock blanks

[Trapper Bill]

I am currently cutting custom barrel channels and ramrod holes. I can use your wood or I have a great selection. I can cut any profile and have a very quick turn around time. Usually in a week. Please PM me or email at [email protected]

 

[rich pierce]

Location?

 

[Trapper Bill]

Location?

Southern Indiana. You can ship it to me. The USPS is very reliable and fairly priced.

 

[SDSmlf]

Any photographs and/or where can we see and hear about your work? No disrespect, you are just kind of new here.

 

[Trapper Bill]

Any photographs and/or where can we see and hear about your work? No disrespect, you are just kind of new here.

I have been a builder for 35 years. I just got tired of high stock prices and long waits so I built a fixture for inletting barrels. Never was a big social media guy but figured this is probably the best way to get the word out. I do custom set up and can give you exactly what you want and it will be square on all four sides

 

[sheriff john]

Do you cut round channels ?

 

[Trapper Bill]

Do you cut round channels ?

Yes sir

 

[Nazgul58]

I have had a barrel inlet recently by Trapper Bill and his work is very good. I met and talked with him a couple times. He showed me his process and the work was turned around quickly. Very friendly and offered any additional help I needed building the rifle.

He and his family has been involved with shooting at Friendship and local matches for a long time.

Turns out we have a couple friends in common.

I would recommend him without any reservations.

Don

 

[sdilts]

How about pricing?

 

[Trapper Bill]

How about pricing?

Barrel channels
Half stock straight. 75
Full stock straight 100
Swamped 125
Oct to round 140

All prices include ramrod groove and drill 5/16, 3/8, or 7/16

Shipping is extra.

Wood prices

Full stocks up to 48”barrel. #1full curl 250-300
#2 75-90% 200
#3 50-75 % 150
#4 plain to 59% 100


Half stocks range from 75 to 150

 

[Trapper Bill]

Barrel channels
Half stock straight. 75
Full stock straight 100
Swamped 125
Oct to round 140

All prices include ramrod groove and drill 5/16, 3/8, or 7/16

Shipping is extra.

Wood prices

Full stocks up to 48”barrel. #1full curl 250-300
#2 75-90% 200
#3 50-75 % 150
#4 plain to 59% 100


Half stocks range from 75 to 150

I have around 80 to100 stocks to choose from

 

[godutch]

Ramrod channel and drilled included ? Ooop's never mind..., you already answered that.

 

[Trapper Bill]

Ramrod channel and drilled included ? Ooop's never mind..., you already answered that.

Yes sir. 5/16, 3/8, and 7/16

 

[deerstalkert]

tag for future!

 

[godutch]

tag for future!

'Got it! All i needed to do was re-read Bill's post before posting. Sheeesh...! 'Like I always say "'No sense being an idiot If you can't show it now and then".

 

[ILoveMuzzleloading]

I can vouch for Bill. Good dude and good work.

 

[godutch]

I can vouch for Bill. Good dude and good work.

I'm in the process of selecting a blank with him right now as a matter of fact ! He's going out of his way to help me pick one out.

 

[Rob M.]

I have been a builder for 35 years. I just got tired of high stock prices and long waits so I built a fixture for inletting barrels. Never was a big social media guy but figured this is probably the best way to get the word out. I do custom set up and can give you exactly what you want and it will be square on all four sides

Thats great !! Best of luck to ya bud ! You do a great service for folks . Brain dead me has to try and remember to write down your info and tack it on the wall of my shop . You can help SO many folks get a start on their builds ... Really cool what you do Bill !! I'll try and send folks your way ...

 

[Trapper Bill]

Thats great !! Best of luck to ya bud ! You do a great service for folks . Brain dead me has to try and remember to write down your info and tack it on the wall of my shop . You can help SO many folks get a start on their builds ... Really cool what you do Bill !! I'll try and send folks your way ...

Ive been averaging less than a week turn around on inpetting. Here is some of my work. I also came into more stock blanks giving more variety. I have well over 150 stock blanks to choose from.

 

[EC121]

Is that the Hoyt barrel? Looks like a big hole.