Ashton Daniels
32 Cal
- Joined
- Apr 21, 2020
- Messages
- 44
- Reaction score
- 215
Not at all, I cut slowly and use water to cool so as to not affect the temper. Two rules of thumb is to not let it be too hot to bare hand touch, or get the steel past a straw color to a plum-blue color from heat.Wouldn't the downsizing with a grinder distemper the blade?
No, not in my experience. If of carbon steel they are most often quite good, durable, and rugged. The cheapo stainless ones seem brittle and do not hold up to heavy work.Cool project....
Am I mistaken in thinking most "beater" machetes are quite soft steel?
What you have made may look like a hunting sword at a distant glance, but among a few other points, a hunting sword blade would start out with some noticeable thickness at and below the guard for a way, tapering to the point. I applaud your efforts, but the results simply fall a bit short as far as representing an 18th century piece. If you cannot forge, grind or heat treat a proper blade, buy one. Some of the best makers started with store bought blades until they were able to do it themselves. Study on some of the 18th c. surviving pieces.
Respectfully, all you've really done is make a narrow machete that has a guard. By making an already too thin of a sword blade more narrow, you have increased its flexibility properties and diminished its penetration abilities. Hunting swords were not just for a coup de gras, but also as a last defense against an enraged beast. You have made a nice looking costume accessory or wall hanger. No pun intended.Respectfully, the video is about making a 18th hunting sword/hanger/cutlass from a 16 dollar machete, you simply aren't going to get that distal taper. I can and have forged swords, however, that was not the point of the video. The point of the video was to make one from a cheap machete. Also I have studied originals from the 1690s-1740s extensively, and there were slab side (without fuller) blades that would resemble the blade from this project.
It is perfectly capable, thank you for your kind input, and I wish you well.Respectfully, all you've really done is make a narrow machete that has a guard. By making an already too thin of a sword blade more narrow, you have increased its flexibility properties and diminished its penetration abilities. Hunting swords were not just for a coup de gras, but also as a last defense against an enraged beast. You have made a nice looking costume accessory or wall hanger. No pun intended.
Just thought I would add this period correct English hunting sword/hanger for folks to see.
View attachment 311279
View attachment 311281
anchor.
Well...So, I guess this means Ashton's Hunting hanger is historically correct?
William,Well...
Since the machete material is flexible, keeps somewhat of an edge, does not snap when hit against a stone... yes. The functionality of the material is better than the average metal from the time period. Forging helps in the material properties mentioned above as well as conserving high quality metal which was not so common.
The main "historical accurate" part is that many items were re-purposed to make hunting sword for the general populations. Many Hirschfänger exist today that were made from cut down or broken swords.
The blade material and some of the style could be considered (loosly) historically accurate, however the construction methods are modern.
This reminds me when I used up my father's 8" grinding wheels making a file into a knife. Anneling? What is annealing?
I am glad the Ashton is having fun doing it!
William
Enter your email address to join: