Larry (Omaha)

That .004 slop will for sure make it wobble. Shims will help, but getting them in is the trick. What I have done to help some of the...

tom, You have a great selection of posibilities for a underhammer. My desire to make an underhammer took me to RJ Renner. Here are...

Just perfect for the little lady! Nice sweet rifle! Larry

Here is another thought: PM BigSkyRambler and ask him what he may have or can get for you. He sells lots of previously owned rifles...

Or you can drill through the middle of the stopper and insert a 1/16" brass rod to strengthen it, leave it extra-long where it goes in...

Get a chunk of Cocobolo wood. Good stuff. If that don't work, cheat and put a tapered brass stem in. Larry

Larry

Larry

This is the first time I have ever posted here in the group, but I have been following along intently over the last 2 years learning a...

This is what no flintlock shooter wants, a hanger. Take note of the good follow through this shooter has. FWIW it isn't me. Larry

As Phil said the set trigger nose should be a sharp hardened point. Send your photos to Track of the Wolf. If Ethan recognizes your...

Take the triggers out and make sure they work outside of the stock. Start there and when it is out make sure there is nothing in the...

It is hard to tell. My avatar was taken by a photographer and he had a camera that sounded like a machine gun. He then picked the...

Not having this in my hands here is what I would do based on what I see and don't know: Stone and polish the tumbler notch, and sear...

Larry