I inherited this gun and kept it around for quite a while now even though it was missing a part. I just liked the look and age of it. It has a short octagon barrel on it, so wasn't sure if it may have been cut down at some point in time or if they possibly made short barrels (24 inches.) I have researched some on the lock maker G. Goulcher placing that from somewhere 1840 to 1860. Any information and approx. value would be appreciated.
G. Goulcher Gun - Trying to get info. and approx. value
- Thread starter maroo1
- Start date
Help Support Muzzleloading Forum:
LD
Hard to tell without pictures, take them outside so there is plenty of light to see details, lots of pictures, of every part of the gun as well as full length.
- Joined
- Nov 19, 2012
- Messages
- 675
- Reaction score
- 512
Mid 1800, missing drum and barrel rib/ ramrod thimbles. Could have been made almost anywhere from New York to Illinois. Value in current condition about $100.00
I'm not much help with rifle but I have read that the Goulcher family family was involved in gunmaking for quite some time in the mid 1800's if not before. At one time in the '70's I had two back action locks made by Goulcher. I built a 58 caliber plains style rifle around one and sold the other with the rifle when I sold it. The locks were not high quality but were functional enough.
Thank you
- Joined
- Feb 28, 2019
- Messages
- 3,633
- Reaction score
- 4,624
Ball'ley & Nies'English gun makers' list s George Darlaston Staffs 1853 1896.. George Wednessbury Staffs (Staffordshire )1878 & 9 quite a family in that trade & region Serviceable locks not high end but huge export to US .Yours looks fine to me it is
what it is. and ide expect worth more than the estimate youve been given a good locks worth that, a sleeper with some history wouldnt be robbing anybody at three times that ..If it where down here it would be snapped up .But you got to' find your man' whatever your selling .Good luck with it .
Rudyard s take on the matter
No offense intended, but the real value in a gun like this that you inherited is the sentimental value. Monetary value, likely not much unless provenance leads you back to a unique owner or builder.
Last edited:
Sam squanch
69 Cal.
- Joined
- Oct 9, 2019
- Messages
- 3,237
- Reaction score
- 4,612
I think maybe this is a later re stock of original parts.
- Joined
- Feb 28, 2019
- Messages
- 3,633
- Reaction score
- 4,624
Doesn't scream restock its Old probably never had a rib just a saddle pipe on the cut of portion Not been 'got at 'in recent times .Agree any family history adds greatly. While personally I call such gun"s Degenerate Hog "rifles others see them in a different light .But to me this looks worth saving' Bucks County' studies such guns .Perhaps he will add a comment .
Rudyard
I agree with Rudyard - looks period to me; also 'Eastern' US possibly made for a smaller person hence the shorter barrel; the checkering adds a quality feature and appears to have been put together by an able hand - Goulcher made a lot of locks for the trade and the trigger guard can be found on a number of rifles - Check out Whisker's books. If the barrel's ok I'd get someone who knows what they're doing to restore it and then shoot it!! Value in NZ would be in the order of NZ$500.00 - I wouldn't guess at US prices. It's a nice piece - treasure it.
Goulcher made locks and shipped them out by the barrel full for gunsmiths to use. I don't think the Goulchers actually made any guns.
This piece looks mid-1800's to me. And I'm thinking that barrel has had several inches cut off the muzzle end.
Is there any sign that might indicate a barrel rib or ramrod thimbles were once attached?
What caliber?
This piece looks mid-1800's to me. And I'm thinking that barrel has had several inches cut off the muzzle end.
Is there any sign that might indicate a barrel rib or ramrod thimbles were once attached?
What caliber?
Honestly I don't know caliber or any other history on gun. This was one that just peaked my interest so I kept. My Dad had a number of guns in the shop he acquired over the years from different places or some were for parts. He closed his shop in late 80s and he passed in the 90s so no one around to ask. Decided to do some research and sell a few. Everyone here has been so helpful - Thank you.
Years back, a buddy used antique barrels for his builds after freshening. Every one was a good shooter. Whether or not that gun's other parts are ok, if so, with the barrel restored, it may well serve another generation. Fun Stuff.
- Joined
- Feb 28, 2019
- Messages
- 3,633
- Reaction score
- 4,624
There you are from something valued at 100$ youd get 500$ in NZ. I knew Bucks County would like it . Nice keep sake & it wont eat much grass. if a pencil just goes in its about 40 cal if it rattles a bit its likley 45 ish .NZ$ are lower than US ones & postage would be a killer so I don't think its a bid Buck Co is making .Golcher isn't listed as a' gun maker ' their was a raft of Golcher's any one might have made or had made guns but non listed as gunmakers as such lock makers where near but outside the Birmingham center of gun makeing along with Brazier & Stanton and others who focused on locks
Regards Rudyard
Secretary of the' Save old junkers' society .
Regards Rudyard
Secretary of the' Save old junkers' society .
Last edited:
Thank you so much for all the great info. I may try that pencil trick to get an idea of caliber. Again thank you!!
- Joined
- Feb 28, 2019
- Messages
- 3,633
- Reaction score
- 4,624
Dear Sam .Back to Col Hawkers flint to cap device & My same topic photoes . I looked him up finding in his "Instructions to young Sportsmen" he waxes on about the 6 he had altrered & all but one failed after hard use . He gets one Parson's GMK of Salisbury to make a stronger version & it works fine Hawker has him make the ' Hammer Bridle' stronger ( By 'Hammer he means what you call a ' Frizzen' & I call a' Steel ' NB Hammer is a' Cock' in his & my terms .He even has the inner parts lined with Platina (Platinum) records 800 shots with but three miss fires (He shot A LOT did Hawker )Date not given but circa 1820 ide guess (going through his two vols Dairies is a major Search ) Worthy of a proper Post probably ?
Cheers Rudyard the' devolving gun nut', actually old Kit Ravenshear was fascinated by devolving locks & 'Roman candle' repeaters .R
Maybe some Monitor will put this add on onto the original post re such guns & the photos I sent with it .Sam being Same Man but Different post could not find the previous one relevant R
Last edited:
AustinMooseJack
The magic ur look'n for is in the work ur avoiding
Hey there! The patina of your rifle is so rich, love it! Beautiful curl on that stock, so uniquely similar to mine here I feel led to share. Let's call them,"brother's from another mother."
My J. Allen Craig built percussion target rifle.
Lock almost unreadable, but G. (George) Goulcher; NY, NY. Components.
Hope you all enjoy. - A. Coy
My J. Allen Craig built percussion target rifle.
Lock almost unreadable, but G. (George) Goulcher; NY, NY. Components.
Hope you all enjoy. - A. Coy
Attachments
-
Screen Shot 2024-07-13 at 3.08.03 AM.png -
Screen Shot 2024-07-13 at 3.09.52 AM.png -
Screen Shot 2024-07-13 at 3.11.29 AM.png -
Screen Shot 2024-07-13 at 3.11.54 AM.png -
Screen Shot 2024-07-13 at 3.14.03 AM.png -
Screen Shot 2024-07-13 at 3.13.20 AM.png -
Screen Shot 2024-07-13 at 3.09.08 AM.png -
Screen Shot 2024-07-13 at 3.08.03 AM.png -
Screen Shot 2024-07-13 at 3.10.31 AM.png -
Screen Shot 2024-07-13 at 3.11.09 AM.png
